Results 1 to 3 of 3
  1. #1

    CB7 accord distributor rotor

    Hello all. I'm not sure if this site is still running but I'll try to post anyway. I need to get a new or 2nd hand distributor rotor. The number on my distributor is TD-31U but the rotor does not have a metal insert instead it has a series of ribs or castellations and the rotor just pushes on the shaft with a tight fit. There is a piece pressed onto the shaft which also has castlellations and corresponds to the rotor. I can't seem to find one of these anywhere.

  2. #2
    Member Array
    Join Date
    Oct 2010
    Location
    Melb
    Car:
    '03 Euro [CL9]
    Quote Originally Posted by steve747 View Post
    Hello all. I'm not sure if this site is still running but I'll try to post anyway. I need to get a new or 2nd hand distributor rotor. The number on my distributor is TD-31U but the rotor does not have a metal insert instead it has a series of ribs or castellations and the rotor just pushes on the shaft with a tight fit. There is a piece pressed onto the shaft which also has castlellations and corresponds to the rotor. I can't seem to find one of these anywhere.
    You gonna need a picture to describe it
    2003 CL9 5AT *ECU REFLASHED*
    CT-E Icebox|Ralco RZ pulleys|K&N filter|DC Header|250cell Cat|Cusco Tower & H Brace| H.Drive Coilovers | Rays RE30 18x8.5 | S/S Brakelines | Rigid Collars

  3. #3
    Hello. Thanks for your reply. I sorted it out. Turns out the ribbed piece on the distributor shaft did come off and I pushed a new rotor on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.