Koni yellow height adjustable question

[Boost]

i dont know if they suit springs that are lowered 3.5". Plus it also depends on spring stiffness. Dampers work to reduce oscillation and to work at their max potential they need to be abe to have its design length of stroke/travel. if you lower the car too much, you have also reduce the shocks allowable travel, thus prevent the shock to work properly.

[alphabeatsco]

i wanna ask a question,
when u lower ur car, does it really affect the REAR control arm?
im afraid the exhaust pipng will hit the rear control control arm.

[Z]

Is there any major issues with running the rear Koni's on the lowest height adjust? Ive heard you can sometimes get the spring slipping off the perch.

Im running King Lows is it makes a difference.

[bigteethygrin]

camber may become an issue depending on how low you go.

[luzinit]

springs may slip off the perch if the spring is too short, ie. cut springs etc, but if u buy proper springs, on the lowest perch should be ok, wouldnt machine any extra grooves to go lower than that lowest perch tho.

[Boost]

machining extra slots for the seat is a cheap and nasty replacement for coilovers... and even then u dont have the full adjustment like coilovers..

[paulosportz]

i got mine on the lowest setting, front and back along with king springs on a civic si

no problems so far!

[DNYALL]

are they the super lows or just the lows. Getting the same set up next week. Need to know what kind of drop it is at lowest.

[Boost]

its around 1 inch drop on the lowest setting.. then if u have lowered springs.. it loweres the car even more..

[Z]

springs may slip off the perch if the spring is too short, ie. cut springs etc, but if u buy proper springs, on the lowest perch should be ok, wouldnt machine any extra grooves to go lower than that lowest perch tho.

Thanks chief.

[nickiipoohz]

how much for koni adj. yellow?

[CTR Coupe]

around 1k for shocks without springs