Adelaide Camber A.S.A.P!

[bennyBear]

Hey, Im McFckd.


Need to find somewhere in Adelaide that would retail a suitable camber kit for GSi teg. Im not sure how much my wheels are in the negative but a little under half my fronts are bald and i want to get this done b4 i fit my new wheels!

Any help or suggestions would be appreciated!

Ta,
Benj.

[vtek]

have you tried wheel aligning it front and rear first? it helps alot.

[mooshie]

should be able to find a kit just about anywhere mate. I got mine about 4 years ago at cartoys, K-Mac kit, had to shave a bit of metal off the plate above the ball joint to stop it from scraping at the top of the wheel well though. you sure its camber causing your problem? I had less than a deg of negative camber and was getting massive inner edge wear, was actually the toe- 4 deg inward... fixed now so no more wearing and the car handles a hell of a lot more predictably too.

[CTR Coupe]

yeah id go the kmac kit just have the suspention place fit it when they fit your wheels and give it an alignment.
make sure they give you 0 toe

[bennyBear]

Cool, will do!

Ta.
Benj.