lowering and rims? problems?

**d15z1SUX** · 28-08-2005 04:46 PM

has anyone had or has 16x6.5 with 195/45/16 tires on super low king springs... or sumthing similar... any problems with it... coz thats wot im thinking of getting or shud i just stick to normal low springs... is there anything such as 195/40/16 tires... where in perth is there to get good rims such as volk te37 or anywhere that can order them...

**shurman** · 28-08-2005 06:40 PM

if you want volks in perth you can contact Tech9Tyres in Myaree... They will lower and fit rims... call scott or nick on 9317 1010

**Laner** · 28-08-2005 08:38 PM

ive got 17x7's on my EG, they dont cause any problems that i cant live with. Without a camber kit im running 1.5 degrees neg on the back and 2 degrees neg on the front... that's as far as i can adjust it tho.. scrubs a little in the front, but as i said, i can live with that!

**aimre** · 28-08-2005 10:01 PM

If u got the right profile rims, it wont be a prob...

im running super lows with 205's on the back, havent rolled the guards and it still dont scrub

**barefootbonzai** · 28-08-2005 10:29 PM

Super lows ain't that low, you shouldn't have any problems with dat profile.

**VTi_b0i** · 28-08-2005 11:04 PM

well i have 17x7's and if there is anybody in the passenger seat i cant turn all the way because it scrubs like crazy... sounds like its shredding my tyre :S
and it gets worse if anyones in the back...

**nexace** · 28-08-2005 11:05 PM

I've got 17's on my civic. Had the rear guards rolled a bit so no problems now. It used to scrape a little bit but not anymore. Now I find the front ones scrape a little when going downhill and braking. No problems with full lock turns etc.