Page 1 of 2 12 LastLast
Results 1 to 12 of 21

Thread: g-tech meters

  1. #1
    Member Array
    Join Date
    Apr 2004
    Location
    wagga wagga
    Car:
    CD5 vti-s

    g-tech meters

    How accurate are they? Do you have to calibrate them for every car ie weight etc? Or are they a plug and play device that u can readily swap from car to car with out adjustments.

    thanks you.

  2. #2
    they can be fairly accurate only if you're on a totally flat and level surface. I tried using it at calder and got roughly the same times as the official timing. You only have to calibrate the level, unless you trying to calculate HP, then you have to input weight ect

  3. #3
    Member Array
    Join Date
    Aug 2003
    Car:
    Accord Vti-S turbo
    they are pretty accurate to drag strip times on level surfaces, and more importantly if you always run on the same strip then the times are consistent and comparable

    You just stick it to the windscreen, level it off and away you go


  4. #4
    Member Array
    Join Date
    Apr 2004
    Location
    wagga wagga
    Car:
    CD5 vti-s
    ahh ok. Thanks guys.

  5. #5
    Member Array
    Join Date
    Feb 2005
    Location
    melb
    Car:
    Integra GSI Turbo
    i found that the qtr mile time was very accurate but the mileage was too much

  6. #6
    Member Array
    Join Date
    Apr 2004
    Location
    Melbourne
    Car:
    EK9
    not accurate..i get mid 12sec outta me car on flat surface, and setup nicely..and low mid 13sec outta drag strip..

  7. #7
    Member Array
    Join Date
    Mar 2004
    Location
    Melbourne
    Car:
    Poo-goat 307
    But are they value for money?

  8. #8
    Member Array
    Join Date
    Apr 2004
    Location
    Melbourne
    Car:
    EK9
    if you wanna make yourself happy...yeap..just always have it in your mind that is always 0.5sec diff...

  9. #9
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney
    Car:
    Em1
    how much and where can u get these gtech meter things from???

  10. #10
    Member Array
    Join Date
    Nov 2004
    Location
    NSW
    Car:
    EG6ish
    the old ones are .5 sec accurate (ther like $50 from ebay and thats all they do)
    all they do is HP and 1.4 mile



    the new ones are 0.01 accurate,
    RPM and shiftlights
    RPMs and Shiftlights we are particularly proud of. We have invented this technology. No one in the world can pick-up RPMs from the cigarette lighter. Yes, MSD ignitions and even diesels work!

    Handling Gs
    G-TECH/Pro SS model has a unique new G-arrow that shows you the direction of the Gs that you are pulling and new large G numbers that are easy to read at a glance.

    Record up to 30 runs
    With the new friendly icon-based user interface you can chose and review any of your runs in a matter of a couple of button clicks.

    3 precision sensors
    We are the only G-meter that has x, y and z precision accelerometers. This improves accuracy and consistency. It also allows you to orient the G-TECH/Pro any way you like.

    0-60 & 0-100-0mph
    0-60 mph is another standard measurement with the new 0-100-0mph becoming increasingly more popular with the magazines.

    1/8th & 1/4 mile
    Oldies but goodies. These two measurements are what has made G-TECH a household name with car enthusiasts all over the world.

    Horsepower
    G-TECH/Pro will give you accurate horesepower ratings for your car before and after modification. It's a great way to see if you are making the right improvements.

    Torque
    With the revolutionary new RPM pickup right from the cigarette lighter we are able to measure Torque and display a DYNO-plot graph. We are the only people in the world to do this at this time.

    60 ft. time
    60ft time is a new measurement which helps with determining if your car is "hookin'-up" or not.

    Road Racing/Autocross
    RR stands for Road Racer. It has all of the features of the SS model plus Road Racing/Autocross mode in which you can record and replay your Gs and RPMs for a given practice or race session.

    PASS Software
    PASS - Performance Analysis System Software. It can be used for replaying and comparing 1/4 mile runs or for replaying Road Race/Autocross sessions. It even replays engine sound based on recorded RPMs.

    Permanent Mount
    RR model comes with the Permanent Mount which allows you to permanently mount the G-TECH/Pro anywhere in your car. The unit itself can still be taken out of its cradle.

    AC Adapter
    RR model comes with the AC Adapter so you can power the unit while you are downloading the runs/sessions to your PC.

    PC Download Cable
    RR model comes with the PC Download Cable that is used to quickly hook-up to your PC and download all your runs and sessions.

    2 hour data acquisition
    RR model comes with 2 Megs of FLASH. This is enough to store over two hours of Road Racing/Autocross sessions (10 Hz recording.) That's more than full-blown data-acquisition systems costing thousands!

    Multiple vehicle support
    With the RR model you can memorize settings for up to 4 cars and jump from one to another in a matter of seconds. Some guys get the extra brackets for each car so moving the G-TECH from one car to another is really a snap.



    get that one
    Ctrl + W



  11. #11
    Member Array
    Join Date
    Apr 2004
    Location
    wagga wagga
    Car:
    CD5 vti-s
    when you say its .5 sec accurate? does that mean your car is slower or faster that the time it says?

  12. #12
    Member Array
    Join Date
    Nov 2004
    Location
    NSW
    Car:
    EG6ish
    u dont know
    if ur car really does a 14.4 it will say ANYWHERE from 13.9 - 14.9
    Ctrl + W



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.