what year ECU came from

**Trust-Me** · 11-09-2003 12:19 PM

Here is a very helpful list of what ecu came in what car

PG6 : 88-89 Integra (all makes)
PM5 : 88-91 Civic/CRX DX
PM6 : 88-91 Civic/CRX SOHC Si
PM7 : 89-91 DOHC ZC (JDM 'EF' ECU)
PM8 : 88-91 CRX HF
PR2 : 89-91 ZC (Euro)
PR3 : 89-91 JDM B16A EF8/9
PR3 -J00 or J51 : 92 JDM Integra B16A EF8/9
PW0 : 89-91 JDM B16A EF8/9 DA6-XSi
PR4 : 90-91 Integra LS/GS
PS9 : 88-91 4 door Civic EX Auto
P05 : 92-95 OBD-1 Civic CX
P06 : 92-95 OBD-1 Civic DX
P07 : 92-95 OBD-1 Civic VX
P08 : 92-95 OBD-1 Civic D15 JDM
P0A : 94-95 OBD-1 Accord EX
P13 : 93-95 OBD-1 Prelude Vtec
P14 : 93-95 OBD-1 Prelude Si (non Vtec)
P27 : 92-95 OBD-1 EG JDM Civic 1600 sohc
P28 : 92-95 OBD-1 Civic Si/Ex
P30 : 92-95 OBD-1 DelSol DOHC Vtec Si/EG SiR
P54-G31 : 1997 Honda Accord 1.8 LS
P61 : 92-93 OBD-1 Integra GSR
P72 : 94-95 OBD-1 Integra GSR
P72 : 96-00 OBD-2 Integra GSR
P73 : 96-00 OBD-2 Integra Type-R (JDM & USDM)
P74/75: 92-95 OBD-1 Integra LS/GS
P75 : 96-00 OBD-2 Integra LS/GS
P2N : 96+ OBD-2 Civic HX Coupe
P2P : 96+ OBD-2 Civic EX Coupe
P2E : 96+ OBD-2 Civic DX Coupe
P2M : 96+ OBD-2 NZ Civic SOHC VTEC
P2T : 99+ OBD-2 Civic Si Coupe
P5P : 97-00 OBD-2 Prelude Type-S (JDM ECU)
PBA : 97+ US Acura 1.6EL
PCT : 98+ JDM ITR / CTR
PCX : 99+ OBD-? S2000

i stole these too from another site, i think it was superhonda.com

**wynode** · 11-09-2003 01:36 PM

Those are JDM/USDM.

Also can you please give credit to the site you got it from.

**vti-2** · 11-09-2003 02:29 PM

Originally posted by wynode:
Those are JDM/USDM.

Also can you please give credit to the site you got it from.

werd! Please give credit where it's due.

And if you can get the Aus spec ones that would be great, we'll make a sticky for it.

**Weq** · 11-09-2003 02:38 PM

woot i got a p28
i heard ppl chip them n stuff? what are my options?

**bengbear** · 11-09-2003 03:13 PM

Originally Posted by Weq

woot i got a p28
i heard ppl chip them n stuff? what are my options?

Yup, the p28 is easily chippable.

As for your options, well....there are alot of fuel map/ignition tables that you can run on the p28 once its chipped, but obviously you need the correct engine to go with it.

Ive tested my p28 on a b16a2, and JDM h22a using their corresponding stock programs. Works fine. Ive also tried aftermarket programs on the b16a such as JUN and Skunk2, but they chew up too much fuel. You can also use it on the b18c type R engine, but not the b18c VTiR due to the lack of secondary butterly control on the p28.

**toE** · 11-09-2003 06:03 PM

wat's the difference between JDM/USDM/AUSDM ECUs??

**wynode** · 11-09-2003 06:17 PM

Originally Posted by toE

wat's the difference between JDM/USDM/AUSDM ECUs??

There are variations fuel/ignition maps etc.

**Setanta** · 11-09-2003 10:07 PM

"PR3 : 89-91 JDM B16A EF8/9
PR3 -J00 or J51 : 92 JDM Integra B16A EF8/9
PW0 : 89-91 JDM B16A EF8/9 DA6-XSi "

Any idea how I'd work out which one I have? I've never got a check-engine light so never bothered looking at the ECU