what would you need to hit ~215 - 230 hp at the wheels?

[2ds]

wha'ts a TODA crate engine and how much do they cost ? =)

-2ds

[TODA AU]

wha'ts a TODA crate engine and how much do they cost ? =)

-2ds

A built to order engine, assembled to meet the end user's requirement.
Obviously this varies from end user to end user...
As such so too does the price...

[pornstar]

just a matter of curiosity, but if I had asked for this setup in Toda parts, could u give me an idea of the price i would need to pay?

Stock supplied B18c7 motor

12to1 CR overbored to 86mm forged pistons
Shotpeened, lightened forge rods
Knife edged, lightened and balanced crank (micro polished)
Toda spec c Cams
1m oversized Titanium Valves (3 angle job), springs, retainers
overbored port and polished head and exhaust ports.
bored out TB by 3 mm
short ram intake pipe
length tuned extractors
hi flow cat, and stuiable exhaust (2 1/4 exhaust)
items like thermostat, oil coolers, and other supplementary items to support the above setup.

just an idea of how much id be spending would be nice, and the sort of power gain that u might see from such a setup

[Jdm Oz]

I found this link for a 12 second all motor eg hatch

Spec Sheet

[TODA AU]

pornstar –
I’m not being mean or rude here… This is straight up…
Don’t confuse a perceivably cool “set-up”, with an actual engine requirement.
A requirement infers there is an actual end application.
This means the engine is built to achieve a specific purpose or purposes…
In that, you need to answer this question… What’s it for?
Is it a circuit engine? If so what type? Endurance, sprint, Gymkhana, drift etc…
Is it class or regulation specific? Fuel type?
Perhaps the application is drag racing… Or perhaps it is to be multi purpose…
Other questions that need to be answered include…
Is engine longlivety a priority?
Is winning also a priority?
Not how much does it cost… but… What is your budget?
In any case, I did say email me if you want one…

[DynoDave]

ok, let me rephrase, if you were aiming for a mid to low 13 second car all motor, with the mods ive listed and engine management/tuning etc what other engine hardware would i need to be looking at

Ok now that I read this post what you are after is 13sec N/A Honda streetcar.If you give me an idea of what chassis you have somone should be able to answer your question of an engine combo,as Adrain has explained we need more info to help you out.
Regards Dyno Dave

[eknine]

i think it shld read...

turbo is the cheaper option to get more power

[snowman95]

ok, let me rephrase, if you were aiming for a mid to low 13 second car all motor, with the mods ive listed and engine management/tuning etc what other engine hardware would i need to be looking at

Ok now that I read this post what you are after is 13sec N/A Honda streetcar.If you give me an idea of what chassis you have somone should be able to answer your question of an engine combo,as Adrain has explained we need more info to help you out.
Regards Dyno Dave

DC2 1995 VTI-R Honda Integra, is that what you mean by Chassis?

[DynoDave]

Now that we know what type of base chassis you have what other mods have you done to your car as I do not want to rave on about this and that to find out you already have some of the parts you need.
Regards Dyno Dave

[snowman95]

Now that we know what type of base chassis you have what other mods have you done to your car as I do not want to rave on about this and that to find out you already have some of the parts you need.
Regards Dyno Dave

from my original post

Ive got a 95 Integra Vtir:

Short ram intake, k&n pod filter
4-2-1 5zigen Headers
Hi flow cat custom 2.5
2.5 full exhaust prof vrs cs cat back
16 inch light weight racing rims

[LatinoHatchCrap]

i can tell you that thats well ova 8 grand of mods not including the mota

[snowman95]

well my budget is 10k