Compressing Good Springs?

**jdm_kid** · 31-10-2005 08:17 PM

Hey guys...

Just brought a set of Trust springs n shocks for the eg6, but however the springs were standard height...making my car look like a 4wd handling beast lol, but yeh ...would it be a good idea to compress these springs? since they are good and the compression rate is good? or would it be a bad idea? eg6 and eg5 springs are the same are they? cos if compressing the spring is bad idea then i will just get another lowered spring set?...hmmm

**sivic** · 31-10-2005 08:59 PM

just get another lower set.
no point in compressing cos the spring rate is designed for their current height.

**CTR Coupe** · 31-10-2005 09:38 PM

This should be in suspension fourm

**bennjamin** · 31-10-2005 09:48 PM

you cannot "compress" any set of springs any lowe than it sits in the suspension - you refer to "resetting" the springs, via re-heating them up and then changing the stroke length etc. IMO dont do this.

Get some kmac/king springs and get super-lows to get that low look u want