DIY PGMFI Fuel Filter Change

[ECU-MAN]

make sure your turning it the correct way,

anti clockwise to undo

[aaronng]

^^ that too.

[Surrufus]

... how do you prime the fuel pump?
or wat ever it was in the 1st post before you start the car

[ECU-MAN]

turn the igniton on to pos II, then off and on again a few times

[mocchi]

Take 2 spanners, place one on the filter side and the other on the nut on the fuel line. Arrange them so that they form a squeezable angle. With your left hand, hold the heads of the spanner in place so they don't fall off the nut and filter. With your right hand in a leather gardening glove, squeeze as hard as you can. Don't worry, you will be able to get it loose. I'm a thin guy, and by squeezing I managed to get it off, while twisting the metal on the nut!

oh really.. dang. its kinda hard because i didnt have good angle to turn it. not sure anymore.

[joyride]

turn the igniton on to pos II, then off and on again a few times

for the noobs, posII is when all the dash lights come to life right before you kick over the motor.

[RIVAL]

hey ECU-MAN do you like have a mechanic shop here in SA or do you do everything at home. If like people payed you would you do an engine swap for them cos i wanna buy a new engine soon.

[ECU-MAN]

Ill PM you dude