0-100, 1/4 estimate?

[typerinside]

what would be the rough/close estimate 0-100 and 1/4 mile for a DC2R thats has only basic mods, (headers, bigger flexi pipe, cat converter and 2.5 inlet catback sytem with 2.5 inlet oval muffler) and with a aluminum intake pipe with apexi power flow A/F,

[all_motor_baby]

well i've seen some bestmotoring vids "the BEST STUFF in the WORLD" and in stock trim they ran high 14's, "jap specs" dont really know how our aust cars holdup stock

[dc2dc2dc2]

mid 14's i rekon. But i guess it all comes down to driver.

[kyle]

id say closer to 14.00secs. My mates JDM B16a EG managed 14.6 and it had only intake and catback.

So a DC2R with LSD and 20 more Kw and a header should go quite good.

[2MPRSS]

with a avarage driver you should get high 14s ive seen a stock looking type R run low 15s to mid 15s in 3 runs at wsid

[superR]

dont expect bellow 14.5 ......

[Stoosh]

high 14 to low 15 depending on driver IMO

[Q_ball]

ive seen stock R's in aust pull low 14s.....i believe our bennjamin pulled a 14.2 in an aus spec dc2r at WSID a while back

[typerinside]

i think it can clock below 14.5 with jus basic mods, but that would depend on the driver,

[Q_ball]

i think it can clock below 14.5 with jus basic mods, but that would depend on the driver,

theres no doubt about it....IT CAN!

[Felix]

i got 14.9 in my DC2 VTIR with basic mods...

I've seen close to stock DC2R's hit the very low 14s...

[totti]

easy low 14's, with a good driver high 13's is achievable