Cutting rocker

[Mashimaro]

Majority of the cars i've seen that have adjustable cam pulleys usually cut their rockers for easy access. I'm goin to be tuning my car very very soon and I'm just wondering would it be that much of a hassle just leaving the rocker as it is? Or would you acutaly suggest going a head cutting the rocker? I dont really want to cut the rocker due to defect reasons and also just in case something gets in there and snaps the belt.

-Tien

[destrukshn]

are you talking about the cambelt/camgear covers?
lol.

[tRipitaka]

i.e.
like this

[Mashimaro]

are you talking about the cambelt/camgear covers?
lol.

[SKREMN]

I cut mine this is what mine looks like

you need to get to these bolts as you knwo to adjust it
it will same you heeps of tiem and hassels just cutting it off

[civic_mods]

p.m alan,he got one from B16B in red which had been cutted
F.S at the moment as i know
btw,he is in melb.

[Mashimaro]

I cut mine this is what mine looks like

you need to get to these bolts as you knwo to adjust it
it will same you heeps of tiem and hassels just cutting it off

Did you also cut ur cam belt cover too? Could have just removed the belt cover LOL.

[fried]

most tuners, such as adrian, will have rocker covers set with cut cam access, used for tuning. once tuned, they replace the rocker cover with ur original.

[Mashimaro]

most tuners, such as adrian, will have rocker covers set with cut cam access, used for tuning. once tuned, they replace the rocker cover with ur original.

unfortunately i'm down here in melbourne -_- I hope tuners down here a nice enough to do the same.

[blackdc2]

i have a red rocker cover that is cut, but in great condition, willing to swap with someone for another red rocker cover that is uncut