DC5 Rims on DC2R,possible?

**civic_mods** · 16-06-2006 11:09 AM

just want to know are the offeset is good for fitting DC5 rims on a DC2R?
thanks

**Q_ball** · 16-06-2006 11:15 AM

yes!
can be done, seen it myself - done and done!

**|N|** · 16-06-2006 11:17 AM

yes it would fit... but may stick out abit due to the slight diff offset...

**civic_mods** · 16-06-2006 11:17 AM

Thanks for the answer guys!!!!

thumb up!

**teggiboy** · 16-06-2006 09:13 PM

sure can...I have DC5 rims on my DC2R.... damn sexy

**nipnip** · 16-06-2006 10:03 PM

Originally Posted by teggiboy

sure can...I have DC5 rims on my DC2R.... damn sexy

do u happen to have blue number plates?

**phantom_civic** · 16-06-2006 11:10 PM

Originally Posted by nipnip

do u happen to have blue number plates?

u refering to the yellow one with the white DC5R rims?
plates BLU.6 sumfin..

**nipnip** · 17-06-2006 02:27 AM

Originally Posted by phantom_civic

u refering to the yellow one with the white DC5R rims?
plates BLU.6 sumfin..

yep, i see it round cabra alot

**teggiboy** · 17-06-2006 02:28 PM

Originally Posted by nipnip

do u happen to have blue number plates?

nope...not me...i'm in Melb

**spoondc2r** · 16-06-2006 11:38 PM

i got dc5r rims on my dc2r as well. the only problem you might have is the clearance on the brake calipers. other than that everything has been sweet.

**arron** · 16-06-2006 11:58 PM

Originally Posted by spoondc2r

i got dc5r rims on my dc2r as well. the only problem you might have is the clearance on the brake calipers. other than that everything has been sweet.

problem with the caliper clearance? really? i would have thought that there wouldnt be a prob due to the dc5r rim being a bigger diameter wheel.

im guessing this was from experience... im actually planning to get the JDM DC5R rim onto my DC2R. if i did that, would i have an issue with the caliper clearnace (I have stock brakes) and would i also need a spacer as mentioned above

**air23box** · 18-06-2006 04:03 AM

Originally Posted by arron

problem with the caliper clearance? really? i would have thought that there wouldnt be a prob due to the dc5r rim being a bigger diameter wheel.

im guessing this was from experience... im actually planning to get the JDM DC5R rim onto my DC2R. if i did that, would i have an issue with the caliper clearnace (I have stock brakes) and would i also need a spacer as mentioned above

it should be ok....but it may sit a bit in the guard....spacer wll fix it...but even without spacer it will clear anything.....I got a set of DC5R stockies btw....anyone want?