Results 1 to 5 of 5

Hybrid View

  1. #1
    Newcomer Array
    Join Date
    Jun 2006
    Location
    Sydney
    Car:
    Legend

    Honda legend O2 Sensor and ECU location

    Hey guys,
    anyone know where those are located? I believe if the O2 sensor is broken there will be excessive fuel consumption. I think this may be why my legend is eating up so much fuel. Anyone know where this is so i can check it/get it checked. The ECU part is to satisfy my curiosity

    Thanks!

  2. #2
    Member Array
    Join Date
    May 2005
    Location
    olinda, vic
    Car:
    08 Audi S5/05 Audi A6
    im pretty sure its under the glove box behind the carpet.

  3. #3
    Newcomer Array
    Join Date
    Jun 2006
    Location
    Sydney
    Car:
    Legend
    umm which one? the o2 sensor or the ecu or both? hehe

  4. #4
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    depends what ledgend you have

    on the 2.7l the O2 sensors are on the exhaust manifolds. the ECU is under the glove box behind the carpet. look for the flashing red LED


    on the 3.2l the O2 are again on the exhaust manifolds, but you have to bridge the SCS connector to get the codes from the ecu. the ecu is under the glove box behind the carpet as well..

  5. #5
    Newcomer Array
    Join Date
    Jun 2006
    Location
    Sydney
    Car:
    Legend
    would the 3.5L version be similar to that of the 3.2L? I have the 3.5L 98 model.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.