DIY ED9 ( 88 gen2 CRX ) B16A Engine transplant

**hitoriko** · 15-11-2011 07:52 PM

I would also mention that there is a simpler way for the wiring
use a RYWIRE VTEC OBD0 Sub harness - $50 -$60 then you just splice into the existing D loom, then use the plugs (which are on the loom) to connect to the VTEC unit, Oil pressure etc..

Its alot easier than mucking around with the cabin loom from the donor car

**szmidi** · 15-07-2012 06:34 PM

Any idea on how long the conversion took you? (minus taking all the photos and what not!)

**ECU-MAN** · 16-07-2012 09:34 AM

the convertion took 4 6hr days

**tiksie** · 16-07-2012 04:21 PM

How long will it take for a normal person ? :P

**ECU-MAN** · 16-07-2012 04:29 PM

its hard to say, everyone is different.

almost like askign how long is a peice of string.

all depends on ones skill level at working on cars and what tools you have.

above time also included stripping the half cut.

**szmidi** · 16-07-2012 05:53 PM

And how many sets of hands did you need / use? I'll be stripping and everything pretty much on my own and just get help for the engine crane / engine stand bits.