Motor Change guide for EG * B / D / H / K SERIES !!!!

[Leprechaun]

isnt this the worng thread for that sorta qz?

[ludetec]

what about the k20?

i have seen it in an eg, n i kno they not cheap...but is it an easy or doable conversion?

[[[d a n n y]]]

what about the k20?

i have seen it in an eg, n i kno they not cheap...but is it an easy or doable conversion?

anythings doable.
im going to do a K serise conversion end of this year so ill keep u posted
in the mean time u can try pming Yonas from JDMYARD

[EG5]

what about the k20?

i have seen it in an eg, n i kno they not cheap...but is it an easy or doable conversion?

Its not as hard as you think
Bolt on engine mount kits available
Conversion harness available

PM me if you wanna talk about it

[Parrott]

Hey guys, had a bit of a search around with no luck, im looking at doing a carby - efi engine swap in a eg gl, im aware it can be done but yet to find a decent diy or guide, if any one could help us with a link or anything that would be great

[[[d a n n y]]]

pm me if u need a guide through to change it to EFI

[AsH_]

how much are K20 conversions ???

ball park figure for a EG ???

parts...

labour...

[qstoria]

how much are K20 conversions ???

ball park figure for a EG ???

parts...

labour...

ball park = enough change from 15 grand to buy some tic tacs

[[[d a n n y]]]

ball park = enough change from 15 grand to buy some tic tacs

sound about right..
AUDM K20 hafl cut around 6-7K
then u got the JDM's around 10K or under
then u got all the other stuff like harness mounts all the little bits and pieces about 15K i recon should do

[dAzLr]

how much do b18c type r front cuts go for ? an wat does ITR stand for cheers

[[[d a n n y]]]

ITR = Integra Type R
b18cR =ITR looking around 5-6K
theres a few for sale in the for sale section.

[Lukezen27]

Hey [[d a n n y]]

I'm getting a B18C2 swap into my EG5 and I have few questions..

1. Can I keep my close to brand new heavy duty clutch and lightweight Fly wheel, Its rated to 250kw?
2. As my EG already has all round disk brakes, can I get away with not doing the brake upgrade?
3. Will the bonnet close like stock as I hate how some EG’s have the front of the bonnet raised on swaps?


Thanks bro

LukeZen