Hid Installation

**LSD GD3** · 01-08-2006 11:37 PM

Installation is so easy

Ballast placing location

Use long Cable ties to hold it in place

**|N|** · 02-08-2006 12:34 AM

is htis suppose to be a DIY to educate ppl on how to install?
did u miss out on a few pics?

**destrukshn** · 02-08-2006 01:43 AM

or you could use that bolt on the left on that pic

**Penguin** · 03-08-2006 07:37 PM

my ballasts are in the engine bay, it does take a bit of work though. be patient with it and it should turn out OK. my unit is made by motomate in australia.

**kit927** · 04-08-2006 05:33 PM

Originally Posted by LSD GD3

Installation is so easy

Ballast placing location

Use long Cable ties to hold it in place

HAHA... yeah the cable tie's werent long enough so we had to connect a few together...

remember to use "LONG" cable ties...

KIT

**bankids** · 21-12-2006 10:41 PM

you can put them under the headlights. there is always a space for ballast

**preludacris** · 22-12-2006 02:08 AM

is it necessary to take off the front bar to install the jazz HID

can't you just go in thru the wheel well, and mount the ballast somewhere there ?

**LSD GD3** · 22-12-2006 08:30 AM

Originally Posted by preludacris

is it necessary to take off the front bar to install the jazz HID

can't you just go in thru the wheel well, and mount the ballast somewhere there ?

well the guy who install it wants to be Pro about it so took it off
and taking bumper off is not hard for jazz... 4 screws and few clips

still can get to the place in the photo from the wheel...

but H4 the bulb is a bit big and some need to fit in to the unit there for need to take the head lights off for more pro and easy getting in to. so if you could fit the bulb in ok then don't need to take bumper off which many people here just dump it in the engine bay...

**saxman** · 22-12-2006 12:33 PM

nothing says quality like "asscar" brand ballasts

I love the sad attempt at ripping off the hella gen 3 ballast design

**preludacris** · 22-12-2006 01:56 PM

LOOLL ASSCAR hahahah

oh .. i think i know what u mean with the H4 bulbs, coz they a bit long yeah ? how hard to install without removing headlights? coz i will be doing in the next couple weeks.

**EK4R** · 22-12-2006 02:02 PM

if you dont want to install the ballast inside the bumper then you need to find a place to put it in the engine bay. dont think you really need to remove headlight that way and probably take you few hours to get both. all plug n play