Page 1 of 3 123 LastLast
Results 1 to 12 of 27
  1. #1

    car pulls to one side when accelerating ..

    since i crashed my car i got semi slicks on...

    and i fixed everything and got an alignment...

    but when i drive sometimes the car pulls really bad to the left... and when i get off accelerator the car pulls slightly to the right ...

    is this a steernig rack problem ?? or is it just coz i have semis on ?? ?

  2. #2
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    have you done your wheel balancing yet?

  3. #3
    Not sure about this, but maybe get the alignment settings rechecked, get the wheels balanced and maybe check your tyre pressures too. Also look for uneven wear on the tyres (if they're new there shouldn't be any problem with this).

    That is about all I can suggest, short of taking it to a reputable mechanic and get it checked.

  4. #4
    wheels are balanced ...

    tyre wear mite b an issue due to them being 2nd hand ...

    the alignment was good coz i checked the specs as he was doing the alignment.

    tyre pressures are fine .. i did them afta i got them balanced..

    hm.. im thinking it mite b bent tie rod ... or farked steering rack ...

  5. #5
    Member Array
    Join Date
    Dec 2004
    Location
    melbourne
    Car:
    2CD and 3DG
    could be that something is loose and isnt holding the alignment firm enough so wen u drive it loosens up making alignment wacko jacko...tie rods, steering rod joints (dont know wat its called)

  6. #6
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    get a read out of your alignment next time.
    so you can check you castor - toe - camber
    etc.

  7. #7
    yeah i got a readout at work

    i got zero toe atm and -1 camber on each side
    castor is a bit weird tho...

  8. #8
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    what's wrong with the castor?

  9. #9
    different on each side ...

    mite b due to the tyres . but then agin some of the bushes on the right lower control arm are worn ...

  10. #10
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    change the bushes.
    the castor may affect it.

  11. #11
    Newcomer Array
    Join Date
    Jul 2006
    Location
    melb
    Car:
    84'
    its important that both of your castor measurments are the same or very close to the same.

  12. #12
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    Honda Civic EF9
    Torque steer?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.