Results 1 to 7 of 7
  1. #1
    Member Array
    Join Date
    Jan 2005
    Location
    Melbourne
    Car:
    Integra LS

    Fulcrum suspension

    Hi. i am just curious if anyone has had any experience with fulcrum suspension and there formula coil over kits

    I am looking at a set of coilovers, but they are mono tube and only have height adjustment. Would these be very stiff and rough for daily driving? And also would these be any good!

    Any info is much appreciated

  2. #2
    Member Array
    Join Date
    Apr 2004
    Location
    Perth
    Car:
    EG Sedan w/JDM ZC
    seeing as they are made in Aus for local roads/conditions they should be fine.

  3. #3
    Member Array
    Join Date
    Oct 2004
    Location
    North QLD
    Car:
    CZ4A EVO X
    i have a set in my Ek Civic ive had them for about 2 years and never had a problem with them if you get the hard soft adjustables they dont go as low. i find that they are not hard but they are still pretty stiff as aposed to tein as my mate had the stiffest setting on his tein and mine was still stiffer. my car is daily driven and i find they are not to hard as long as your driving in pot holes. if you wanna know anymore info just ask away and ill try to answer them for you.

  4. #4
    Member Array
    Join Date
    Jun 2007
    Location
    Sydney
    Car:
    EG2
    any more info on these?? links??

  5. #5
    Member Array
    Join Date
    Jun 2005
    Location
    Melbourne
    Car:
    '92 EG Civic VTi
    I've got a set on my EG. Working great, but the car handles like ass with no RSB and small as FSB. Get those two in combo with the Fulcrum Sussy set n' you should be laughin'. Mind you, they're don't handle as nice as some of the more expensive ones but they let you have some fun .

  6. #6
    i know this is probably a really old thread, but has anyone else had any experience with fulcrum formula coilovers? I'm looking to install a set on my civic and just wanted to get some feedback before going ahead with the installation. Any feedback would be appreciated. Cheers!
    d e e p S i x [d6]™

  7. #7
    Member Array
    Join Date
    Jun 2005
    Location
    Melbourne
    Car:
    '92 EG Civic VTi
    Few actually have these suspension set ups. Mines still fine a year later. Mind you, I've had these for 3 years now and no problems. They haven't leaked or softened up too much. This is with some pretty hard corner as well. I'll let you know how they react with ASR brace and ITR rear sway bar once I get them attached.

    Like it was said before, they're not particularly for race purposes but are above the standards of OEM setups (meaning they're considerably stiffer).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.