Page 1 of 3 123 LastLast
Results 1 to 12 of 25
  1. #1
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    EG4

    Major vibrations when hitting vtec in 3rd gear

    as title suggests when i hit vtec in 3rd gear i get huge virbrations and even in forth and fifth when going about 80- 100 and not in vtec they are still there

    any suggestions as to what it may be??

    thanks.

  2. #2
    Member Array
    Join Date
    Dec 2004
    Location
    Melbourne
    Car:
    RD7
    *moved to technical section
    Quote Originally Posted by ChargeR
    Ozhonda mods don't sleep, they wait.

  3. #3
    Member Array
    Join Date
    Dec 2003
    Location
    bel air, cos my mum got scared
    engine mounts busted?

  4. #4
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    EG4
    just went and had a look at mounts they look ok but im no expert the one on the righthand side of the engine bay when looking at it has 2 bit of rubber that are loose is thta normal?

  5. #5
    Member Array
    Join Date
    Jul 2005
    Location
    South West Syd
    Car:
    ek <3
    Quote Originally Posted by bal
    as title suggests when i hit vtec in 3rd gear i get huge virbrations and even in forth and fifth when going about 80- 100 and not in vtec they are still there

    any suggestions as to what it may be??

    thanks.
    thats wheel spin buddy. =]

  6. #6
    Member Array
    Join Date
    Dec 2003
    Location
    bel air, cos my mum got scared
    can u see if the rubber is actually cracked?

  7. #7
    Member Array
    Join Date
    May 2005
    Location
    Melbourne, Victoria
    Car:
    98 VTi-R Prelude
    loose???? it should be all one piece, the middle rubber should be free of cracks,

    if it occurs at a given rpm range then good chances its an engine mount

    have u driven it hard lately? high rpm dump type launching???

  8. #8
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    EG4
    carnt see any cracks but yeah they are loose but doesnt look like they were the one piece

    car has been sitting around for a bout 6 months only getting driven very rarely to and from work so no i havent drivven it hard i just got my licence back had a working licence so i could only drive it like 5mins to and 5 mins from work what am i looking at money wise to replace engine mount??

  9. #9
    Member Array
    Join Date
    May 2005
    Location
    Melbourne, Victoria
    Car:
    98 VTi-R Prelude
    buying a new mount is about 100-150....my front engine mount cost 140...
    install/changeover is pretty easy

    it sounds like an engine mount

    how does the car feel???? does it still pull hard like it used to?

  10. #10
    Member Array
    Join Date
    Oct 2003
    Location
    HK, Melbourne, Japan
    Car:
    S2000, Jazz, Civic
    Could be Engine Mount or Inner CV is worn
    does it vibrate under load?

  11. #11
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    EG4
    yeah car feels fine no powerloss just bad vibrations
    ill take it into mechanic to have a better look at it thanx for your help CUL8R least no im going to mechnic with no idea and an idea of what cost im looking at

  12. #12
    Quote Originally Posted by jdmlvn
    thats wheel spin buddy. =]

    Nah it cant be wheel spin cuz hes in high gears, he even said even in 4th and 5th without vtec its still vibrating

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.