Your AV setups?

[Jnr Teggy]

at the moment in my teg i am running a pair of Kicker RS6s splits in custom buildouts (the old boston FS60's only just fit :? ), a pair of JL 12w0 subs, all powered off a pair of audison amps...signals come from an eclipse HU

[maxim]

I'm running the stock speakers with an Alpine single cd head unit and an Alpine 3 disc minidisc stacker in the 2nd din space. I forget the exact model numbers though as the kit is about 3 years old.

Works really nicely with the Alpine/Honda mounting kit... worth all the of the money it cost.

maXim

[Calvo]

im runnin two kenwood 7x10's 220W 3ways, from a JVC KD-S895 Mp3 HU. its a pretty basic setup atm, but im strapped for cash
i got a 12" JBL sub, but need to get an amp.

[LUD02C]

I was struck by an audio bug...
And he installed

- Boston FS-60
- Audison SRx4
- Pioneer checker plate subs (2)
- Pioneer 6 x 9 (not installed, sitting in room)
- Panasonic Head Unit

All installed by a genius FHRX, if you have no idea who this is go to fast fours forum -> Audio Section!!!

Jnr Teggy can back me up!

[Calvo]

is he ya mate or wat?
did it cost u much? if anything.

[LUD02C]

I didn't know him!
I meet up with him one time, he gave me some advice on amps and splits i listened and he installed them!

He is a professional installer, thats his job!
And he is excellent at what he does...
Here is his link, have a look FHRX Studios

Price is 100% reasonable, for the service you get it's cheap!

[Calvo]

nice.
might have to check this fella out wen i want to get my 4 channel amp installed. i heard its a real bitch to do.
even my HU and 7x10's were quite a tedious job, but im an amatuer.

[bumthology]

Hey i'm also stuck with the audio bug.
i have JVC-985 Mp3 unit
2 x 12' Phoenix gold DVC subs
JAycar and Kenwood amp,
Hertz Splits at the front
JBL's for rear fill
sound deaden some bits and pieces
custom install to fit this all in a crx
=O
also bought a perspex glass which the holes were cut too big
so gonna use it somehow to get some effex goin on.
=D

[poid]

nice.
might have to check this fella out wen i want to get my 4 channel amp installed. i heard its a real bitch to do.
even my HU and 7x10's were quite a tedious job, but im an amatuer.

Nah installing an amp is dead easy

[vti-2]

Fhrx is an awesome installer, i highly recommend his work! He posts a lot of his work on auscaraudio and is always happy to discuss stuff. Top installer...

[tegboy]

My current system in my 91 Teg, is a Eclipse 8061 H/U and 8 disc changer, this linked to Eclipse 31-band EQ. In the front I am in the process of getting Rockford Fosgate 6.5 woofers for the doors. In custom kicks I will be installing MB Quart 4's splits. In the hatch, I have 2 Rockford Fosgate 12 subwoofers Alpine MRV-1005 amp to run the woofers in the front doors. Alpine MRV-t505 to run splits. Orion HCCA-225r to run the sub. All is wired with 1/0AWG Power cable by Phoenix Gold and audio and speaker cable from Stinger, Lightning Audio cap dry cell battery. The entire car is sound deadened from top-to-bottom with Dynamat and Sound Off. The front doors are fully sealed. Its a very sweet sounding system, that I hope to compete with some day.

[toE]

As for me,

Ride: 1994 Accord vt-i
HU: Pioneer DEH-P8250
Front Stage: MB Quart QM-TX130 (Old School 4" Splits)
Front Stage Amp: Still looking!!
Sub: 15" Orion 2NT
Sub Amp: Rockford Fosgate Punch 250.2
Boot dampened with Flashtac and Serentiy Max
Installation done by moi except for HU!!
Objective: Well, SQL!! Love deep bass notes and clarity too!!

Still doing my boot install actually, false floors left to do and vinyl furnishings. Woohoo!! Proud of my work. Will post pics asa i'm done!!