Page 1 of 2 12 LastLast
Results 1 to 12 of 16
  1. #1
    Newcomer Array
    Join Date
    Oct 2008
    Location
    QLD
    Car:
    dc5r

    how to fill number plate holes on front bumper.

    hey ozhonder. im thinking of relocating my front number to the side for a more jdm look. im just wondering what is the best option to cover the holes from the old mounting position?

    Thank you for reading

  2. #2
    masking tape.

  3. #3
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    jb weld
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  4. #4
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    The question has already been answered, but here is a few extra things.

    1. Having a side mounted number plate isn't jdm. All jdm Honda's had centre mounted plates. The only cars that came out factory with side mounted number plates were Mitsubishi Evos, as they had a front mounted intercooler.

    2. Having a side mounted plate is illegal in Australia.
    to see all of my build, checkout


  5. #5
    Quote Originally Posted by mocchi View Post
    jb weld
    he asked for the best option.

    that must take into consideration the length of time it takes to complete.

    your method is inferior to masking tape.

    it takes too long.

  6. #6
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    you cant have a side mounted number plate, for ease of reading your number plate must be in the center.
    otherwise i would put my number plate on the driver side facing away diagonally so speed cameras wouldnt see it, since all speed cameras in WA are on the left hand side of the road.

    but if you find it necessary, place rubber gromets in the wholes, but you will have a flat spot on your bumper ahaha.

  7. #7
    Member Array
    Join Date
    Oct 2010
    Location
    on the toilet with my iph
    Car:
    marios' kart
    Supa glu!!
    i didnt choose the jdm life, jdm life chose me...

  8. #8
    Member Array
    Join Date
    Oct 2010
    Location
    Melbourne
    Car:
    Grocery getter
    pm cb.welding co.
    I don't even know anymore.

  9. #9
    Member Array
    Join Date
    Feb 2006
    Location
    sydney yo
    Car:
    green whip!
    you can get little things that clip in, there's a genuine part number somewhere
    bought some for my ek ages back

  10. #10
    Member Array
    Join Date
    Jan 2010
    Location
    Cabramatta
    Car:
    Canon 5d
    Quote Originally Posted by NeedVtec View Post
    pm cb.welding co.
    some good info here

    or

    you can get filler/putty then shave then respray
    you're probably asleep right now but I love you and you're the most beautiful girl I met, inside and out. have a good nights sleep and I hope this puts a smile on your face when you wake up.

  11. #11
    Member Array
    Join Date
    Jan 2005
    Location
    Toronto, Ontario
    Car:
    Corolla Spec S
    Quote Originally Posted by simmy View Post
    some good info here

    or

    you can get filler/putty then shave then respray
    +1
    filler/putty for cheaper option

  12. #12
    Member Array
    Join Date
    May 2010
    Location
    Cabramatta,NSW
    Car:
    DB6
    plastic weld for 50$ get bar resprayed after.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.