CRX Seat mounting points

**heist** · 08-12-2006 10:26 AM

hey guys thought i would try here too....

just a quick question, the rear front seat mounting points (as in where the 2 rear bolts go into the raised part of the floor through the rails), are they the same in a crx as they are in a civic? cos the bit where the bolts go through have (the threaded part) has snapped completely off(the metal has beed torn).

i need to get it fixed asap and i was wondering if the civic is the same and i can just drill the spot welds out and weld in new mounting points....

oh and by the way you might want to check yours too, cos if u were in an accident cos the seat is only held in at the front 2 bolts you might go straight through the windscreen

**Dylanamus** · 08-12-2006 03:15 PM

At a glance the mount points in an ED crx and a GL civic (my only personal comparison) looked the same. I would say some models would be the same, but others not (genious revelation?). I was comparing two cars from 88, probably shared half the same production line! Follow that line of thinking and you'll probably find the same kinda similarities in same year models.

**heist** · 08-12-2006 03:19 PM

just tro be specific, i do mean the AUDM ED9 crx and the ED AUDM Civic.

i guess ill just have to get some civic ones and compare...

**Dylanamus** · 08-12-2006 03:36 PM

The GL was a twin carb JDM model and the mounts appeared the same, so you're in with good chances in your case, mate. Sorry I can't be more specific. Good luck