Amp Install

**destrukshn** · 11-12-2006 05:16 PM

from the head unit and amps it should be red and white.
but yes
lol.

**GIPONU** · 11-12-2006 05:38 PM

so red and black is still acceptable?lol sorry man i have no clue, just self learning..

**destrukshn** · 11-12-2006 05:58 PM

same thing.
lol.
dw.
as long as i assume were talkin about the same thing.
lol.

**GIPONU** · 11-12-2006 06:02 PM

lol, yeh.. so when i have time i just need to go down to jb-hifi/strathfield car radios and get that Y connector, then both my subs will pump..lol

**destrukshn** · 11-12-2006 06:03 PM

your powering 2 subs off a 4 channel?
what subs?

**GIPONU** · 11-12-2006 06:10 PM

yeh..heheh

2x pioneer 12" 400w rms 1000w peak. model is TS-W306C
Its gonna blow. I tried it in my cousins civic EM1 and he has a soundstream amp which i dunno how much power it has.. but it was so crankin loud, u basically had to wear ear muffs to drive..lol

**destrukshn** · 11-12-2006 06:12 PM

ah... those ones.
okies good luck and have fun.
=)

**GIPONU** · 11-12-2006 06:14 PM

i will.. as long as i remember to disconnect the negative battery terminal b4 everything.. I'll tell ya if i get electric shocked or not..lool

**aka_NSX** · 11-12-2006 07:45 PM

from the photo ur amp seems like only 2ch not 4ch

so the AMP has only 1x RCA I/P and the other one is RCA O/P

**GIPONU** · 11-12-2006 07:47 PM

lol yeh man my badd.. i thought that amp is mine.. but mine is a 4 channel one.. with 2 RCA.. just like that amp in the foto.. and my head unit only has 1 RCA out. which is gay~

and i have no clue wat "so the AMP has only 1x RCA I/P and the other one is RCA O/P" means..haha

**aka_NSX** · 11-12-2006 07:53 PM

Originally Posted by GIPONU

lol yeh man my badd.. i thought that amp is mine.. but mine is a 4 channel one.. with 2 RCA.. just like that amp in the foto.. and my head unit only has 1 RCA out. which is gay~

and i have no clue wat "so the AMP has only 1x RCA I/P and the other one is RCA O/P" means..haha

its very hard to say coz if judging from that photo the 1xRCA is I/P and the other one is O/P, but if u said urs is 4ch so the speaker O/P must be more than the one on the photo am i correct ?

u should take a close up photo of ur AMP on the RCA and terminal section, then i can tell exactly how to do it