Results 1 to 11 of 11
  1. #1
    Member Array
    Join Date
    Sep 2005
    Location
    adelaide
    Car:
    honda less :(

    main relay??? pics??

    does anybody have pics of where and what the the main relay is and looks like? i cant get the p[ics in thge diy post to load up.!!! if so can yau please please email it to me? honda_boy_3000@hotmail.com any help would be grateley appricheated!!!

  2. #2
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Honda Beat
    ok what car?
    its a brown box under the drivers side dash
    i have a spare if its gone?

  3. #3
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    do they load up for you now ????

  4. #4
    Member Array
    Join Date
    Feb 2005
    Location
    Perth WA
    Car:
    EG5.9, EF9, EL2
    pics of the PGMFi Main relay on EG please anyone ??

  5. #5
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    as on the 1st page..


    the pics always work for me, are they working for you or what ????

  6. #6
    Member Array
    Join Date
    Feb 2005
    Location
    Perth WA
    Car:
    EG5.9, EF9, EL2
    cant see no pics.. nor any red x's.. this IS the 1st page ?

  7. #7
    Member Array
    Join Date
    Dec 2006
    Location
    Perth
    Car:
    1989 Integra LS
    no pics for mee too

  8. #8
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    I think I fixed the pics now, can you tell me if they work fir you now ?

  9. #9
    pix no worky John. Where did u host it ? re upload ?

  10. #10
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    try refreshing da page, clt F5 style

  11. #11
    your computer is a freak Sir. No work here still.

    Since it isent working - here is a good informative site on MAIN RELAYS

    http://techauto.te.funpic.org/mainrelay.php

    Also here is a pic

    92, 93, 94 and 95 Civic Main Relay Removal Procedure

    A main relay should look like this

    or this.

    The main relay is to the left of the fuse box, wedged up against the left above the hood latch in a tight spot.
    1. Remove the coin box (for a better view.)
    2. With a 10 mm socket or wrench., reach deep inside and at the top of the relay there you will feel a bolt.
    3. Unbolt it. (If you cannot unbolt then you may dislodge the relay from the the steel tab using a large flat head screw driver.)
    4. If you damage the tab, you may be able to flatten the tab back to shape.
    5. Bring the relay down and unplug the connector by squeezing the locking tab then separate the connector from the relay.
    6. See installation at the bottom of this page.
    Last edited by bennjamin; 04-01-2007 at 09:09 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.