Page 5 of 7 FirstFirst ... 234567 LastLast
Results 49 to 60 of 77
  1. #49
    the National Code of Practice is superceding the state based system:

    http://www.dotars.gov.au/roads/safet.../vsb_ncop.aspx
    B20VTEC - since 2002

  2. #50
    Member Array
    Join Date
    Apr 2006
    Location
    Dee Why, Sydney
    Car:
    '88 B16A ED9CRX
    Thanks for the link, Tink - Any idea when this is going to happen?
    ... [ About Me | My Blog ] ...

    Honda Parts For Sale
    Check out the Listing

  3. #51
    Quote Originally Posted by Bayani View Post
    Thanks for the link, Tink - Any idea when this is going to happen?
    see post #14 on page 1

    http://www.ozhonda.com/forum/showpos...3&postcount=14

    dunno about Victoria RTA stance however...
    B20VTEC - since 2002

  4. #52
    Member Array
    Join Date
    Aug 2005
    Location
    perth
    Car:
    eg sedan
    whats with the headlights thingy. in WA headlights cant be lower than 500mm off the ground. i failed it once before. is it because it means your light beams won't shine as far and u may not be visible to cars that are high such as 4wds and trucks?

  5. #53
    Member Array
    Join Date
    Apr 2006
    Location
    Dee Why, Sydney
    Car:
    '88 B16A ED9CRX
    [To be replaced]
    Last edited by Bayani; 04-12-2007 at 02:57 AM.
    ... [ About Me | My Blog ] ...

    Honda Parts For Sale
    Check out the Listing

  6. #54
    Member Array
    Join Date
    Aug 2005
    Location
    perth
    Car:
    eg sedan
    yes i agree too.

  7. #55
    Member Array
    Join Date
    Apr 2006
    Location
    Dee Why, Sydney
    Car:
    '88 B16A ED9CRX
    Bumping
    ... [ About Me | My Blog ] ...

    Honda Parts For Sale
    Check out the Listing

  8. #56
    Member Array
    Join Date
    Dec 2006
    Location
    Gold Coast/NSW
    Car:
    06EuroLux6M
    Here's one I just found out about, and I wouldn't be surprised if it applies to all models from 2006
    on.
    According to the EPA the Db limit on a 06-07 Euro is 82 db, whereas the 03-05 was 90db.....

    My stomach growls louder than than!............
    Anyone got a spare 05 compliance plate...........lol
    133.4kw atw
    14.8 - 400m Willowbank

  9. #57
    Last edited by tinkerbell; 20-12-2007 at 08:48 AM. Reason: removed inappropriate jibe
    B20VTEC - since 2002

  10. #58
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR

    DECC Vehicle Inspection Report - Noise/Tampering

    NOISE TEST
    1) The Report allows for 2 Tests before receiving a Defect Notice then a "RTA Suspension Compliance" where your car will be taken off the road if it does not pass

    2) Exhaust System diagram

    3) Noise Test @ 5700rpm (limit 90dB) and Throttle-off/Deceleration. 3 Consecutive results must be under 90dB all up and averaged... although i'm sure this is vehicle dependent

    4) Tester Notes... consists of any comments on things such as non-compliance items, modified items that need to be reverted to oem, etc.

    TAMPERING TEST

    1.1 - Visible Smoke

    2.1 - Exhaust Configuration & Exhaust Manifolds
    2.2 - Exhaust Temporary noise reduction device
    2.3 - Catalytic Converter
    2.4 - Diesel Exhaust System (>4.5t GVM)

    3.1 - Fuel Tank

    4.1 - Reconditioned Engine
    4.2 - Replacement Engine
    4.3/4.4 - Imported Engine (inc. performance engines)

    5.1 - Positive Crankcase Ventilation (PCV) Valve
    5.2 - Exhaust Gas Recycling (EGR) system
    5.3 - Evaporative Emission System
    5.4 - Air Injection Pump/Pulse Air System
    5.5 - General Emission Control Equipment
    5.6 - Air Filter/Cleaner & Assembly

    6.1 - Carburettor System
    6.2 - Electronic Engine Management System
    6.3 - Throttle Body
    6.4 - Air Flow Meter
    6.5 - Fuel Injectors & Fuel Rails
    6.6 - High-Pressure Fuel Pump/Adjustable Fuel Regulator

    7.1 - Dedicated LPG/CNG Systems
    7.2 - Dual Fuel LPG/Petrol Systems

    8.1 - Turbo CHarger Exhaust Waste Gate Valve
    8.2 - Blow Off Valve
    8.3/8.4 - Turbochargers/Superchargers
    8.5/8.6 - Intercooler Turbocharger/SUpercharger
    8.7 - Aftermarket Turbocharger exhaust manifolds
    8.8 - Chemical type engine power boost system
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  11. #59
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    ^^^now with all that said... who here thinks they'll pass.... this test is absolute bullshit... if my now stock del sol can't pass this then no Holden/Ford can.. stupid department.

    My results today was 86dB and 92dB on throttlr off coz of the stupid buzzing of the oem Honda muffler
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  12. #60
    i passed by an RTA approved engineer in an '83 prelude with a JDM B16A runing a 2in exhaust and a straight through Genie Turbo muffler with 2.5in tip...

    i got between 88.7 and 89.1dB readings...

    i doubt the tests are different,

    we did the test in a car park next to a large cricket oval, so there were no walls around at all...
    B20VTEC - since 2002

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.