BOV on N/A car

[denot]

Hi guys...

noob questions about BOV:
1. will I be able to fit this on N/A car (e.g. my 2006 Civic)?
2. if yes, then will it sound weird?
3. will it works with auto car?

Thanks

[Zdster]

First you need to know what a blow of valve is, so read this:
http://www.gofastbits.com/index.php?...tion=tech_info

Then you will understand why you get laughed at if you were to ask this question to turbo guys .

[dupac->]

it would just be silly IMO

but dunno if yah can or not..
ahhah

[XB-16-AX]

Hi guys...

noob questions about BOV:
1. will I be able to fit this on N/A car (e.g. my 2006 Civic)?
2. if yes, then will it sound weird?
3. will it works with auto car?
Thanks

1. - YES you can fit it on your car.
2. - dont know, possibly very very quite.
3. - Not as good as a manual as you can rev higher on a manual car to produce more pressure/vacume.

Honestly - to beable to use a BOV you need high pressure in your intake pipe/plenum. this is the reason why it works alot better on forced induction cars as they produce alot of these with the help of the snail!!

i wanted to try this one day ..and buy a really weak BOV and loosen the valve/spring so that it can open up easier and not much pressure is required.

BUT i didnt get around to it ..as i dont want to waste my AC Autotechnic (US brand) CAI and put a hole onto it.

If you deicde to try it let us know ....

[poid]

no no no no NO!!


thats the polite reply from me

[denot]

bleh...

so the answer are:
1. no
2. no
3. see the answer above you dumbo!!!!

thanks zdster to post that link ^_^

[denot]

1. - YES you can fit it on your car.
2. - dont know, possibly very very quite.
3. - Not as good as a manual as you can rev higher on a manual car to produce more pressure/vacume.

Honestly - to beable to use a BOV you need high pressure in your intake pipe/plenum. this is the reason why it works alot better on forced induction cars as they produce alot of these with the help of the snail!!

i wanted to try this one day ..and buy a really wear BOV and loosen the valve/spring so that it can open up easier and not much pressure is required.

BUT i didnt get around to it ..as i dont want to waste my AC Autotechnic (US brand) CAI and put a hole onto it.

If you deicde to try it let us know as i would be very keen on doing the same thing....

wow... one controversy here...

[XB-16-AX]

wow... one controversy here...

yeh coz im curious as well ...ahaah

[bennjamin]

its like the opposite of a "sleeper".

car sounding like its something it isnt...whats the point ?
Jst get a CD with teh blow off noise on it , and drive around and repeat the track every time u change gear.

[denot]

Jst get a CD with teh blow off noise on it , and drive around and repeat the track every time u change gear.

i think thats harder than putting BOV to an N/A car... -_-"

[turbo convert]

iam selling BOVS BUT PLEASE NOOOOOOOOOOOOOOOOOOOOOOOOOO

[XB-16-AX]

its like the opposite of a "sleeper".

car sounding like its something it isnt...whats the point ?
Jst get a CD with teh blow off noise on it , and drive around and repeat the track every time u change gear.

hahaha CHAMPION!!

ROFL!!!

or u can buy that thing on ebay that u fit on ur exhaust pipe which "suppose to" make a "Blow Pop Off Vavle" sound... that was said on the item listing.

i think someone has posted in the forced induction or the lounge section .. hahahaha