JUN vs. TODA: Camshafts

[AsH_]

ive been thinking of purchasing some new camshafts...


not sure whether to save up heaps and go TODA or just go for JUN...

has any1 got these in their car???? and wat do you think is a better choice if there is...

[Perry]

which Spec TODA you planning to get and same for Jun aswell

[todas**t]

toda cams r old design they need to change the design..

[AsH_]

spec C...

[Perry]

spec C...

I heard spec C's were good on 2L's from what i heard

[DynoDave]

I heard spec C's were good on 2L's from what i heard

Another internet myth
Regards Dyno Dave

[Perry]

Another internet myth
Regards Dyno Dave

ok thanks myth solved

[spoondc2]

I heard spec C's were good on 2L's from what i heard

How high can a 2L rev?
You talking about K20? If yes, skip this post

[faijai]

How high can a 2L rev?
You talking about K20? If yes, skip this post

Its Perry btw

I'm referring to b18c storke to 2L (darton sleeved) or b20 darton sleeved

[spoondc2]

Its Perry btw

I'm referring to b18c storke to 2L (darton sleeved) or b20 darton sleeved

Hello

Yeah, i am thinking how high could a 2L b series rev to since Toda C is a cam which produce max power on high rpm

[todas**t]

spec C r made for cars that rev to 11 or 12 vtec kicks at 7 for a b18c if u put it on a stock itr motor u only got 2000 rpm of GGzzz...and for a b16a its kicks in at 7.5...skunk and m22 cams make about the same power with a early vtec

[AsH_]

spec C r made for cars that rev to 11 or 12 vtec kicks at 7 for a b18c if u put it on a stock itr motor u only got 2000 rpm of GGzzz...and for a b16a its kicks in at 7.5...

actually at 5,800rpm stock B16A