JUN vs. TODA: Camshafts

**AsH_** · 07-04-2007 11:41 PM

ive been thinking of purchasing some new camshafts...

not sure whether to save up heaps and go TODA or just go for JUN...

has any1 got these in their car???? and wat do you think is a better choice if there is...

**Perry** · 08-04-2007 12:39 AM

which Spec TODA you planning to get and same for Jun aswell

**todas**t** · 08-04-2007 12:40 AM

toda cams r old design they need to change the design..

**AsH_** · 08-04-2007 12:41 AM

spec C...

**todas**t** · 08-04-2007 12:51 AM

spec C r made for cars that rev to 11 or 12 vtec kicks at 7 for a b18c if u put it on a stock itr motor u only got 2000 rpm of GGzzz...and for a b16a its kicks in at 7.5...skunk and m22 cams make about the same power with a early vtec

**AsH_** · 08-04-2007 12:52 AM

Originally Posted by todas**t

spec C r made for cars that rev to 11 or 12 vtec kicks at 7 for a b18c if u put it on a stock itr motor u only got 2000 rpm of GGzzz...and for a b16a its kicks in at 7.5...

actually at 5,800rpm stock B16A

**todas**t** · 08-04-2007 12:54 AM

Originally Posted by AsH_

actually at 5,800rpm stock B16A

yes but wen u put spec C in it will kick in later

**gelo** · 08-04-2007 01:05 AM

i wouldnt consider spce C if the car is to be a daily driver
because the car wont have much drivablity
u will probably have to rev til 4000rpm to get the car to move or something

**sydteg21** · 08-04-2007 01:07 AM

Get head job first la : )

**locote** · 08-04-2007 01:09 AM

Sorry to go of subject but who sells JUN cams or supplies them??

**AsH_** · 08-04-2007 01:11 AM

JUN vs TODA...

or are they just cams???

i was looking over the net and was curious as to wats a better brand to go fore in terms of performance... yeh im a daily driver(to from work) but i am inspired to take the car to the track...