Car Break Down!!!

[Spoon-Accord]

omg guys.. my accord broke down...
the bottom pulling came loose.. and came off the block..
the teeth in the puller and on the block are chewed..
i dont noe wat to do now but stare at the car and soobing..
can i actually get a new bottom pulley??
like an actual lightened one or better one??

wat can i do??

so lost..

so depressed

"I'll Be Back"

Ken

[wynode]

You mean the crank pulley?

I just did mine two days ago!

If you are lucky, the thread won't be damaged and you should be able to just put a new pulley in and bolt it up. If you are unlucky, the damage could be worse.

BTW: A new pulley from Honda Australia is going to be EXPENSIVE! Call up Robert at Hanny's (but something tells me you're not in Sydney!

[vti-2]

Ken, find out what parts you need and if i can help with getting new Honda parts for you i will. Just drop me a PM.

[Spoon-Accord]

the thread??
in the pulley is like.. rounded off..
so i think its no good..
the thread for the bolt is perfect..
i need a new pulley..
a race one or something
cause i noe honda is expensive!!

[wynode]

You should be able to find a second hand one.

What exactly happened? I'm thinking the bolt has snapped, with some of the bolt still left in the thread.

Calm down a bit and explain!

[Spoon-Accord]

i am calm..
the bolt is still normal.. no scratches. no thing..
like a new bolt


the pulley however is ruined in the middle.. the little cut in it is rounded off.. and those ziggy zaggy teeth are rounded too..

i think the bolt became undone.. and was spinning freely sometimes..
and suddenly today the bolt got abit more loose.. and the pulley started to tap the chassis..

after like 200 metres down road.. it went pak pak pak pak pak

then.. eveything was disabled
no power steering.. no nothing.. just for brakes...
my car i cursing it..

i also need a new steerinf colum..
cause when i turn it into ignition. no lights light up
so i made my own switch to manually turn it on..

my car is a junk yard.. someone help me@@

Ken

[Spoon-Accord]

i think i need one of these kits...

anyone help??

Ken

[Calvo]

so i made my own switch to manually turn it on..

my car is a junk yard.. someone help me@@

Ken

lol dude, i think u need to fix it up a bit!! dont give up on the accord! have faith...

[wynode]

anyone help??

**Extends hand into monitor and replaces Spoon-Accord's pulley**

Geez man, just take it to a mechanic. Mine just snapped and luckily for me I wasn't moving at the time.

[Spoon-Accord]

stuff that.. i dont trust any mechanics.. i dont even trust honda now!!
arrghhh

ohh wellz shit happens..
guess i have to look for someone who noes where to get these pulley kits from

Ken

[toE]

HondWreck in Westall..speak to Keith i think his name was. Check www.yellowpages.com.au for number...i cant remember.

sorry to hear bro!!

good luck.

[Spoon-Accord]

thankz jimmy..

i just hope to get this thing up and running