Page 1 of 27 123411 ... LastLast
Results 1 to 12 of 323
  1. #1
    Member Array
    Join Date
    Jun 2005
    Location
    Brisbane Queensland
    Car:
    1985 ford laser

    Power Of the Dseries Turbo!! - can you handel it?! - Check it out!

    Hey guys

    Being a big turbo dseries fan, i find it dissapointing that not many people on here explore the possibilites of the turbo Dseries engine. It is unfortunate of this due to lack of knowledge and realisation of the potiential!

    Due to being involved in far to many threds in the past in regards to the idea of turbochargeing a dseries engine to be "Futile", "waste of money" "not good value" or the typical "you will never outrun a Bseries" Decided to post a few links as i have been useing this site alot... and a very very good site it is...

    www.turbod16.com

    Just want to make this clear, no im not looking for fights/arguments/flamers... however i am certain these 1 or 2 specific people will no doubt post some useless negative post here anyway.

    Also no im not trying to convert people away from their beloved b's h's and k's just want to show people who are wanting some more power for their honda that there is a good safe and reliable route down the turbo d path

    no bullshit/excuses etc.... just some dyno charts with their basic builds and a few very very cool and inspiring movies!!!

    ps... i think there is one of a turbo d16z6 (same as ozzy d16y1 sohc vtec) with a bolt on greddy kit outrunning a k20a in an eg hatch with quad throttles etc etc..... lots of good viewing here everyone will appreciate !

    would be nice for a bit of recognition for the underdog Dseries relative and its potential!

    all good guys enjoy!

    TurboD16.com -----> THE MOVIE!
    http://www.turbod16.com/viewtopic.php?t=10521

    Turbo Dseries Vids
    http://www.turbod16.com/viewforum.ph...2cef10cb1f5e06

    Turbo Dseries Rides
    http://www.turbod16.com/viewforum.php?f=4

    Top Turbo Dseries Hp Figures
    http://www.turbod16.com/viewtopic.php?t=4140

    Top Turbo Dseries 1/4 Times !
    http://www.turbod16.com/viewtopic.php?t=13384

    Turbo Dseries Engine Bay Shots!
    http://www.turbod16.com/viewtopic.php?t=29766&start=0

    SEMI BUILT - Non-vtec Turbo D run low 12's in oz! (respect dan / beast civic)
    Page 30

    Ek Civic Hatch, Stock D16y4 + AVO turbo kit! OZ BUILT
    http://www.ozhonda.com/forum/showpos...72&postcount=5

    WEQ - Eg Civic Sedan, D16y1 + Bolt on Greddy Kit!
    Dyno Sheet - Page 16
    Videos (civic vs s2k & Civic vs Dc2R) - http://weq.hondatech.com.au/turbo/Vid/

    Budget Basic Easy turbo setups - AND THEY WORK!
    http://www.homemadeturbo.com/turbo_projects/

    General Good Other webpages
    www.d-series.org
    www.homemadeturbo.com


    THIS THRED IS NOT AIMING TO DISCUSS WHY A D-SERIES TURBO IS BETTER THEN ANY OTHER ENGINE OR MODIFYING PATH! IT IS TO DISCUSS THE POTENTIAL OF DSERIES TURBO ENGINE SETUPS !!!!!!
    Last edited by Sexc86; 05-06-2007 at 10:10 PM.
    Light up with Lyle - Electrical / Communications / Instrumentation

  2. #2
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    Some good vids, ect there, turbod16 is a grat site, certainly opens ur eyes

  3. #3
    Member Array
    Join Date
    Nov 2003
    Location
    Tasmania
    Car:
    Honda Corolla G
    Im tempted to turbo my D16a, hmmmmm...

    Might do some reading tonight.

  4. #4
    Just wondering, Would these turbo kits apply to the D17A2's too? (My car is a 2005 Civic hatch Vi)

  5. #5
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind

  6. #6
    Member Array
    Join Date
    Jun 2005
    Location
    Brisbane
    Car:
    Jazz
    its gud know the potentials of d-series as well..impressed to see some pple on the forum building turbod ones. gud work sexc86

    anyways i think i will stick to my k-series for now

  7. #7
    Newcomer Array
    Join Date
    Feb 2005
    Location
    Sunny Coast, QLD
    Car:
    '88 CRX
    already on it! (53ERX) wealth of information on there.. and lots of hard to source parts also. (and cheap forged rods/pistons!)

  8. #8
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    the turbod16 vid is a good example of a d series turbo with stock internals, its not even a very high powered setup but as u can see it goes hard!

  9. #9
    i am defs turboing my EJ8 ...in time with the help of aza hopefully

  10. #10
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    EG hatch
    d series turbos go hard i should know ive got 1 in d house hold onli sitting on 5 psi so good but so much effort 2 hav it reving like a b series turbo but much worth the effort wen u say nah its onli a d series single cam:P:P
    EG RiceBall #2

  11. #11
    Member Array
    Join Date
    Jun 2005
    Location
    Brisbane Queensland
    Car:
    1985 ford laser
    Quote Originally Posted by hinezz View Post
    its gud know the potentials of d-series as well..impressed to see some pple on the forum building turbod ones. gud work sexc86

    anyways i think i will stick to my k-series for now
    hehe yeh you could be like the guy on the video that goes down to a turbo d!
    Light up with Lyle - Electrical / Communications / Instrumentation

  12. #12
    Member Array
    Join Date
    Sep 2006
    Car:
    CRX SiR turbo
    yeh im with you mate.. ive heard and seen a few worked D16's pulling massive amounts of power from stock internals and forged. the only thing is tho.. alota d series engines tend to be smokey if not maintained. and the only reason i went turbo with be b16 is cos it was already there
    NEW hondata s200. Melb only

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.