Results 1 to 9 of 9
  1. #1
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Odyessy 2005

    RB1 Odyssey steering not straight?

    Hi everyone, my problem as my title says, my steering isnt straight. Initially I jumped the gutter at about 40km/hr on the front left wheel. The tyre was busted and my control arm was whacked out. I went to Pedders to take a look at it, the control arm was replaced (front left) and both front wheels were then taken away to be 'fixed' the guy said it was buckled.
    Now the mechanic says my car is fixed but the car still swerves to the left when my hands are of the steering wheel, and for it to go straight i have to steer a little to the right? Ive been back and forth arguing with Pedders saying its not fixed yet, but they said its mechanically perfect but my car still isnt going straight? and now i have no idea what to do, suggestions anyone?

  2. #2
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Do you have the alignment printout from pedders? So the car pulls to the left on its own after you set it to drive straight (with the steering pointing slightly to the right) and you lift your hands off the wheel?
    --------------------------------------
    Stocky CL9 - 1:17.2

  3. #3
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Odyessy 2005
    I asked for a printout but they didnt give me one which begs the question did they really do a wheel allignment? the guy kept assuring it was 100% straight, but my car begs to differ.
    Yea thats right aarong, the car pulls the left after i allign it straight.

  4. #4
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    You'll need a printout. Go to a good tyre shop that you trust, (I like my local tyrepower) and get an alignment check (about $30 here for a 2 wheel alignment). Before the alignment, tell them you want a before and after printout so they know to writing it down or print it out.
    --------------------------------------
    Stocky CL9 - 1:17.2

  5. #5
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Odyessy 2005
    thanks for the advice, i'll go do it on monday, when there open

  6. #6
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by misterhoang View Post
    thanks for the advice, i'll go do it on monday, when there open
    Also ask them for the alignment specs of your RB1 odyssey, so you know how far off your alignment was.
    --------------------------------------
    Stocky CL9 - 1:17.2

  7. #7
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Odyessy 2005
    thanks for the advice aarong now my Odyssey is back perfect where it started!

  8. #8
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    No problem. Glad to be of help.
    --------------------------------------
    Stocky CL9 - 1:17.2

  9. #9
    Newcomer Array
    Join Date
    Jun 2004
    Location
    Bankstown, Sydney
    Car:
    99 WRX
    For future reference Excelsior Steering in Bankstown has to be one of the best in Sydney I would never take any of my cars to some franchise where they get apprentices to do everything.. Excelsior is owned and ran by the one guy so his work is 100%..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.