Your Mods To 2006-2011 FD Civics

[jprak]

Anyone know if K&N Typhoon Intake for Civic Si 12-14 would fit our FD2s?

Civic Si 12-14


K20Z2

i think the heat shield might touch the ECU cover..

why not look for the 2006-11 ver.

http://www.knfilters.com/search/prod...prod=69-1014ts

[FDYOU2]

i think the heat shield might touch the ECU cover..

why not look for the 2006-11 ver.

http://www.knfilters.com/search/prod...prod=69-1014ts

2006-2011 Si's have different manifolds

[Honda_FD]

2006-2011 Si's have different manifolds

If you get a 45 degrees silicone pipe from the throttle body onto the intake pipe it will fit. Figured that out after I hacked up my heatshield lol.

Are you selling your old CAI? Wanna get one for Summer. Dont want to keep asking mum to borrow her car on hot days

[threesix]

@ROMARIOSEBASTIAN on IG is my fav for sure.

so many nice FD's on IG

anyone got and IG favs??

[Honda_FD]

Whats a good sized Exhaust Pipe and Cat for an FD2? My stock cat is on its way out and its starting to pop and crackle when I back off or down gear.
Sounds awesome so looking at getting a cat thats not too restrictive. Was thinking of a High Flow cat and a 2.5" Mid Pipe?

The car sounds kind of high pitched at the moment so trying to get it to have a deeper tone. Is that the muffler?

[LetsDuDiss]

Anyone in Syd going JDMyard Honda Showoff next month?

[IEVAQ8]

Whats a good sized Exhaust Pipe and Cat for an FD2? My stock cat is on its way out and its starting to pop and crackle when I back off or down gear.
Sounds awesome so looking at getting a cat thats not too restrictive. Was thinking of a High Flow cat and a 2.5" Mid Pipe?

The car sounds kind of high pitched at the moment so trying to get it to have a deeper tone. Is that the muffler?

I have a custom made 2.5" cat back system with a x-force twin tip muffler on the back if ur keen...
can be heard as still on the car...

[Honda_FD]

I have a custom made 2.5" cat back system with a x-force twin tip muffler on the back if ur keen...
can be heard as still on the car...

Is yours a FD2? I'll take the Mid Pipe if you wanna separate. I wanna keep my Varex as I wake up at 5am for work. Dont wanna cold start with a loud exhaust.

[*DAN*]

Whats a good sized Exhaust Pipe and Cat for an FD2? My stock cat is on its way out and its starting to pop and crackle when I back off or down gear.
Sounds awesome so looking at getting a cat thats not too restrictive. Was thinking of a High Flow cat and a 2.5" Mid Pipe?

The car sounds kind of high pitched at the moment so trying to get it to have a deeper tone. Is that the muffler?

I reckon 2.5" might be too big, would go 2" or 2 1/4" on yours

That said, would anyone here be interested in EP3R oem wheels? has 205/45/17 tyres that have plenty of tread.

[Honda_FD]

I reckon 2.5" might be too big, would go 2" or 2 1/4" on yours

Hondas slow anyways. Why not just make a whole bunch of noise if I'm not going to go far.
Who else will make you deaf when we "Cruise"?

[lolmclol]

honda fastest in market, especially the FD, its practically super car spec!

[Honda_FD]

honda fastest in market, especially the FD, its practically super car spec!

With throttle response faster than a human blink