-
24-01-2014 11:05 PM
#17917
Originally Posted by SharkChu
They fit nicely in front speaker spots? Which one you got, I'll get the same =D co-axial or component?
I already have a aftermarket double din pioneer headunit.
Im using stock speakers still haha
Why dont you run front and rear speakers off an amp and get a sub instead?
-
25-01-2014 03:18 AM
#17918
Originally Posted by nicho
I had the same issue with problem 2. Took it to the exhaust shop guy and he took a chunk of the axle until there was clearance.
switch the hanger of the exhaust so it'll hang on one only + use hose clamp to lock it up so it wont go loose
had to do that to my Js as it always gets off its hanger and raddles <.<
Originally Posted by lolmclol
this is what I'm imagining right now
im gonna get a pic of it like that, watch me
Originally Posted by Honda_FD
I personally would go Alpine Type R. Only because i love my Alpines.
I dont think changing speakers will do much difference. Your headunit is still sending out the same signal.
The only way to make a difference is to change the headunit. Theres only so much power the headunit sends out.
Also, Need your opinion. These on my FD?
Yay or Ney?
Carving Head 40
dont tell me those are woirk emitz?
FUCVK i wana run emitz cause looks bawse
-
25-01-2014 01:09 PM
#17919
Originally Posted by Honda_FD
Im using stock speakers still haha
Why dont you run front and rear speakers off an amp and get a sub instead?
Nah, not after anything amazing. Just want an aftermarket speaker that will fit nicely in the front speakers. I feel like the coaxial speakers may be too tall, and hit the door grille. But components, I cbb with the tweeters..
Edit: Stuff it, I'm going to get the Type R speakers, I'm sure being slightly underpowered with no amp will still be okay.
Anyone know who can install/apply dynamats?
EDIT 2: Damn impuslve buys, bought Type R co-axials for fronts, and dynamat for the 2 front doors. Labour is gonna be the most costly =[
Last edited by SharkChu; 25-01-2014 at 11:25 PM.
-
26-01-2014 12:45 AM
#17920
Originally Posted by SharkChu
Nah, not after anything amazing. Just want an aftermarket speaker that will fit nicely in the front speakers. I feel like the coaxial speakers may be too tall, and hit the door grille. But components, I cbb with the tweeters..
Edit: Stuff it, I'm going to get the Type R speakers, I'm sure being slightly underpowered with no amp will still be okay.
Anyone know who can install/apply dynamats?
EDIT 2: Damn impuslve buys, bought Type R co-axials for fronts, and dynamat for the 2 front doors. Labour is gonna be the most costly =[
Ohh you actually bought the Type Rs?
Tell me how to goes and if theres a noticeable difference.
I was going to wait till my speakers blew before changing them but if you say its
a massive difference I'll change mine.
@Jprak
They're Carving Head 40.
Dunno if they're Work Emitz. They look the same lol
-
26-01-2014 08:29 PM
#17921
You would be surprised what difference it makes when you amp and sub it.
Dropped my car another 10mm today. I hear rubbing when driving on hills. Need a wheel alignment asap. Maybe they can tilt the wheels in a bit.
-
27-01-2014 07:12 PM
#17922
http://www.gumtree.com.au/s-ad/black...res/1037340943
This makes me wish I purchased jprak's set of wheels a while back =[
How much would you guys pay for this? Tempting.
-
27-01-2014 07:17 PM
#17923
500 max
I sold my set for 250 cause I was desperate
-
27-01-2014 07:27 PM
#17924
Originally Posted by jprak
500 max
I sold my set for 250 cause I was desperate
Btw, I saw the pics of these wheels on your car and looks amazing, however, my car isn't lowered at all, wouldn't look as good would it? Thinking of plastidip it matte black even .. thoughts?
-
27-01-2014 07:29 PM
#17925
Originally Posted by SharkChu
Btw, I saw the pics of these wheels on your car and looks amazing, however, my car isn't lowered at all, wouldn't look as good would it? Thinking of plastidip it matte black even .. thoughts?
when i had no kit or springs
Last edited by jprak; 27-01-2014 at 07:35 PM.
-
28-01-2014 09:07 PM
#17926
Who's here has had the J's racing muffler (C304) fitted to their FD1? How do you guys rate it for noise and all?
-
28-01-2014 09:33 PM
#17927
Originally Posted by *DAN*
Who's here has had the J's racing muffler (C304) fitted to their FD1? How do you guys rate it for noise and all?
im running an FD2R ver on my car and kinda sounds the same. idle = very quiet and when it needs to be loud it'll be loud
-
28-01-2014 09:45 PM
#17928
Originally Posted by *DAN*
Who's here has had the J's racing muffler (C304) fitted to their FD1? How do you guys rate it for noise and all?
I dont know if the FD and FD2 has the same exhaust system but when I changed the muffler on my FD2 it barely made any noise
difference. If you are going to change the muffler go for a catback system or remove the resonator.
Thats just from my personal experiences. So dont be disappointed if you spend $500 on a muffler and it made no difference. :P
Do intake for the extra #YOLOSWAG points. Makes a HUGE difference in noise
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks