Page 1501 of 1751 FirstFirst ... 50110011401145114911498149915001501150215031504151115511601 ... LastLast
Results 18,001 to 18,012 of 21004
  1. #18001
    Quote Originally Posted by jprak View Post
    lolmclol you can always drill a hole for me
    LMFAO

  2. #18002
    has anybody got any experience with car insurance when we change our brake system and wheels?

  3. #18003
    Quote Originally Posted by jprak View Post
    lolmclol you can always drill a hole for me
    now that's an offer I wouldn't pass! (-;

  4. #18004
    Quote Originally Posted by iou View Post
    has anybody got any experience with car insurance when we change our brake system and wheels?
    As long as you advise them, I'm sure you wouldn't have any problems. Should you not advise them and you have an accident and its proven that it was due to faulty brakes, you'd have tough time trying to find a leg to stand on.

  5. #18005
    Member Array
    Join Date
    Mar 2011
    Location
    Melbourne, Vic
    Car:
    Not a Honda
    Quote Originally Posted by lolmclol View Post
    As long as you advise them, I'm sure you wouldn't have any problems. Should you not advise them and you have an accident and its proven that it was due to faulty brakes, you'd have tough time trying to find a leg to stand on.
    Would the same apply to coils?

  6. #18006
    Quote Originally Posted by *DAN* View Post
    Would the same apply to coils?
    I would ensure that you advise them, just to ensure you don't have any problems in the future.

    But worst case scenario should you not advise them and you have an accident and the assessor feels your car wasn't roadworthy due to having non-ADR approved suspension, thus causing your accident, you'd have tough time trying to find a leg to stand on.

  7. #18007
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    HAHAHAH FD owners must be homosex ahahahahha
    S P A M | W O R K S
    hehe.
    PHC


  8. #18008
    Quote Originally Posted by curtis265 View Post
    HAHAHAH FD owners must be homosex ahahahahha


    wot

  9. #18009
    Member Array
    Join Date
    May 2011
    Location
    Sydney
    Car:
    '11 FD1
    My Injen CAI just came in, what's the best way to ensure there will be no CEL?

    Just disconnect the battery whilst installing?

  10. #18010
    Remove the + and - terminals from the battery, and ensure that you're careful with the sensor from the intake.

  11. #18011
    Quote Originally Posted by SharkChu View Post
    My Injen CAI just came in, what's the best way to ensure there will be no CEL?

    Just disconnect the battery whilst installing?
    Disconnect the battery and once installed let the car idle for 10-15 mins


    17x9+22
    17x10+18
    Too hardcore? Saw a set of rims i want but 10" with low offset scares me :s
    Is it even possible?

  12. #18012
    Member Array
    Join Date
    Jun 2011
    Car:
    Bagged FD Civic
    its possible, jamie ran 10" all around but it'll poke and all. 9" +22 will poke (rear) front wont if you got camber bolts.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.