Buddy club 4 cams + small tube header + B18C hits WSID

**ginganggooly** · 12-09-2007 11:37 PM

13.6 @ 103 MPH 2.127 60'

Untuned, b18c2 with BC4 cams and valvetrain, small tube header, 4.2FD b16a gearset, street tyres, king springs, stock shocks and a semi gutted EG.
Second pass was the best, the bogan factor at WSID meant they HAD to have burnouts, which really impacted on the full field managing to get a decent amount of runs; i was there for 5 hrs 30 mins and managed three whole stinking runs.

Thus far the package seems to be very good, i'm quite eager to get the car up on the rollers with Dynodave in the drivers seat with his trusty old laptop.

I'll do a full review of the setup after tuning.

**Phamburger** · 12-09-2007 11:52 PM

Originally Posted by ginganggooly

13.6 @ 103 MPH 2.127 60'

Untuned, b18c2 with BC4 cams and valvetrain, small tube header, 4.2FD b16a gearset, street tyres, king springs, stock shocks and a semi gutted EG.
Second pass was the best, the bogan factor at WSID meant they HAD to have burnouts, which really impacted on the full field managing to get a decent amount of runs; i was there for 5 hrs 30 mins and managed three whole stinking runs.

Thus far the package seems to be very good, i'm quite eager to get the car up on the rollers with Dynodave in the drivers seat with his trusty old laptop.

I'll do a full review of the setup after tuning.

WOW Slim!

Thats just pimping man!

13.6 with the FD ur running GOD DAM! im mighty impress and jealous!

Also comes down to u being a skillful driver :P

Regards,
David

**fatboyz39** · 13-09-2007 12:37 AM

Good shit ginganggooly. Soon the new B series will be up there with the K-series.

Yes your gearing is way off dude. Time to chuck that shit gearbox out and get a 4.4FD b16a or ITR box.

**EG5** · 13-09-2007 01:41 AM

nice one Slim , push it for some low 13s

**panda[cRx]** · 13-09-2007 01:52 AM

nice, but if it's not tuned why are u taking it to the strip?

**DynoDave** · 13-09-2007 01:55 AM

Originally Posted by panda[cRx]

nice, but if it's not tuned why are u taking it to the strip?

Because he does not give a shit about these engines and he knows the guy that did the engine and base map and said its fine to thrash it,and his next engine is about to get built.
Regards Dyno Dave

**panda[cRx]** · 13-09-2007 01:59 AM

Originally Posted by DynoDave

Because he does not give a shit about these engines and he knows the guy that did the engine and base map and said its fine to thrash it,and his next engine is about to get built.
Regards Dyno Dave

hahaha fair enough