should be polo>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>s2k>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>fn2r>ep3r
connorling, your profile and evidenced by your post tells me alot about what type of feral you are..... all class 'hay'!!!! ps. not your m8....
Finally i was able to have the steering rack slider replaced. Had the rack regressed as well.
It has made a big difference. There is no play or slop in the steering anymore, it is alot more direct.
There is heaps less bump steer and the wheel self centers easier.
It drives in a straight line nicer as well, without having to adjust the wheel so often.
Got my mechanic to show me the part, it was cracked, basically fell apart in his hands.
It has taken while but finally got to the bottom of it. Just thought id post this up in case anyone else was having the same issues.
How much did the parts cost and how was the labour cost expensive?
How much did the parts cost and how was the labour cost expensive?
Thanks
The part was like $50. I bought it from Tegiwa
Labour was pretty good too @ $160.
It does involve taking out the steering rack. Or at least moving it into position where you can get a spanner to change the part. There are a few DIY tutorials on the web, but i wasnt game enough to try.
Hey guys,
Just wondering if anyone has used depo headlights for their ep3.
I've found a pair on eBay from US and just have a few questions:
How are they to install?
Will it make a difference to the strength of light because they're designed for driver right-hand side or will it be ok to fit to our models?
Cheers
installed bc br coilovers on my ep3 last weekend. its currently on no.24 dampening setting (8 from the hardest) all round.
just wondering what everyone else has theirs set at? im still playing with it to find the best comfort. only down point currently is that my front driver side tyre rubs on slight bumps. if i go stiffer on the front, will it prevent the scrubbing?
also the driver side seems to be slightly lower than passenger side, maybe by like 8-10mm. is that coz of the engine weight being on right hand side?
any input would be good! thanks!
Does anyone know part numbers for door lock actuators for EP3 (pre-facelift)? My passenger side has stopped working and the drivers side seems to hesitate a little, keen to replace both.
Bookmarks