EP3 Type R

[charliebrown]

Im assuming all guards are rolled?

I think you can pull it off......

I was on tein springs with 17*9+35 and 215/45 and it was okay. I scrubbed at the fronts cause my shock absorbers were worn. Rears were fine

Yeah will be rolled n trimmed. What camber were you running on that setup though? Natural would have been more -2 or more at the rear

[viett]

Anyone try Brembo brake pads yet? Any goooot?

[stienerv2]

Yeah will be rolled n trimmed. What camber were you running on that setup though? Natural would have been more -2 or more at the rear

From memory, my natural camber was only -1.5. It didn't get past -2 for me

[Perry]

WOOOW ALL YOU guys got it easy on the rear.

[stienerv2]

what do you mean Perry?

[SuperSteve]

Hey Guys. Went to look at my cabin filter today (behind the glove box) and noticed the trays were both empty. Anyone know if all honda cabin/pollin filters are the same ??

[charliebrown]

Hey Guys. Went to look at my cabin filter today (behind the glove box) and noticed the trays were both empty. Anyone know if all honda cabin/pollin filters are the same ??

yeah pretty sure they are n8

$20 from ebay US says it fitted all honda and acuras

[stienerv2]

It was $17 from Mekong in Canley

[SuperSteve]

thanks guys

[LittleDragon^^]

So I got my oem headlights retrofitted and modded. Now have true quad projectors, dual high beam (not quad), full black satin finish and red projector lenses (white light output) to match red honda badge.

Will post better pictures of light output, colour band at cut off, red lenses etc when we have a nice clear day here in Darwin - we're on cyclone watch at the moment and should have a few days of overcast, rainy weather!

[doosra]

Wow looks pretty good. Keen to see how they look a bit further away in daylight

[LittleDragon^^]

Wow looks pretty good. Keen to see how they look a bit further away in daylight

Thanks doosra

Looks pretty aggressive, IMO. I think I might need a carbon/black bonnet to blend it in more though.