Page 1346 of 1384 FirstFirst ... 34684612461296133613431344134513461347134813491356 ... LastLast
Results 16,141 to 16,152 of 16607

Thread: EP3 Type R

  1. #16141
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Quote Originally Posted by Wiz Khalifa View Post
    i know this has been asked alot but what engine oil are you guys using now?
    Been using valvoline synpower 5w 40, but on my last oil change I decided to give Penrite hpr5 a go, so far no problems, runs pretty smooth and cheaper to
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  2. #16142
    Member Array
    Join Date
    Jan 2005
    Location
    Sydney
    Car:
    ABA-EP3, LA-EP3
    Quote Originally Posted by UNA91 View Post
    Been using valvoline synpower 5w 40, but on my last oil change I decided to give Penrite hpr5 a go, so far no problems, runs pretty smooth and cheaper to
    Any difference in oil pressure or oil temp?

  3. #16143
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Quote Originally Posted by Poeter View Post
    Any difference in oil pressure or oil temp?
    Unfortunately I can't tell since I also relocated my oil pressure gauge to tee into the oil pressure switch and my oil temp to the oil pan on that oil change to make way for an oil cooler
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  4. #16144
    went from royal purple hps 10w40 to motul h-tech 100plus 10w40 mainly due to frequency of oil changes and $$ (starting to get really into track days haha)

    Tbh RP is pretty overrated and exxy (~$100 for 5L) and h-tech (~$60 for 5L is a good fully synthetic (NOT A GROUP 3 - was speaking to motul rep at work).

    Sadly h-tech only comes in 5L and the ep3 takes ~5.5L haha

    I've got gauges so I'll report any noticeable differences between the two on my next track day next sat

  5. #16145
    Member Array
    Join Date
    Dec 2012
    Location
    Melbourne, VIC
    Car:
    EP3R
    My EP3 is getting pretty rough torque steer, shaking left to right when on full throttle.... Any suggestions what could be the problem? (Tires? Camber?)
    EP3 TYPER

  6. #16146
    what size wheels and tyres and how recent was last alignment?

  7. #16147
    Member Array
    Join Date
    Jun 2011
    Location
    Cabramatta
    Car:
    EP3R
    Quote Originally Posted by SHRUKA View Post
    My EP3 is getting pretty rough torque steer, shaking left to right when on full throttle.... Any suggestions what could be the problem? (Tires? Camber?)
    Think it could be caused by balancing problems too

  8. #16148
    Member Array
    Join Date
    Dec 2012
    Location
    Melbourne, VIC
    Car:
    EP3R
    Quote Originally Posted by andhey View Post
    what size wheels and tyres and how recent was last alignment?
    I'm running 17x9+35 at the fronts with 225/45 with negative -1.5 camber
    17x8+32 at the rears with 215/40 with natural camber.

    Got wheel alignment as soon as these wheels went on.

    Bump steer is also pretty rough...

    Maybe I need the same sized tyres all around?
    EP3 TYPER

  9. #16149
    whats your steering rack angle like? if youre lowered and running -1.5, and rack may be angled like a knt it might be whats exacerbating bump/torque steer that youre feeling. ep3 got no torque tho lul

    simple but did u check tyre pressures and wheels balanced
    KEEP IT VIET | KEEP IT JDM
    FaLL iN LoVe WheN YoU aRe ReAdY, NoT WhEN YoU ARe LOnEly

  10. #16150
    Member Array
    Join Date
    Dec 2012
    Location
    Melbourne, VIC
    Car:
    EP3R
    Quote Originally Posted by charliebrown View Post
    whats your steering rack angle like? if youre lowered and running -1.5, and rack may be angled like a knt it might be whats exacerbating bump/torque steer that youre feeling. ep3 got no torque tho lul

    simple but did u check tyre pressures and wheels balanced
    I'm running Todd's Tie Rods and their toe adjustable so I don't think the steering rack is the problem. My tyre pressure is at 40 psi all around but I'll be sure to go get a wheel balance check.
    EP3 TYPER

  11. #16151
    Member Array
    Join Date
    May 2010
    Location
    Melbourne, West
    Car:
    EP3
    Quote Originally Posted by andhey View Post
    went from royal purple hps 10w40 to motul h-tech 100plus 10w40 mainly due to frequency of oil changes and $$ (starting to get really into track days haha)

    Tbh RP is pretty overrated and exxy (~$100 for 5L) and h-tech (~$60 for 5L is a good fully synthetic (NOT A GROUP 3 - was speaking to motul rep at work).

    Sadly h-tech only comes in 5L and the ep3 takes ~5.5L haha

    I've got gauges so I'll report any noticeable differences between the two on my next track day next sat
    ~4.7L. Definitely not 5.5L.

  12. #16152
    Member Array
    Join Date
    Sep 2008
    Location
    Melbourne
    Car:
    Kermit K20A
    Quote Originally Posted by Symphorced View Post
    ~4.7L. Definitely not 5.5L.
    It depends on what oil filter you use. If you use a Z547 (same as OEM) it will be between 4.5-5L

    If you use a Z79A, it will be between 5-5.5L
    Kermit EGK20A
    Winton: 1:35.08
    Wakefield: 1:08.8

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.