Clearance varies with the sway bars I think, ie. the Whiteline swaybar on Australian DC5R will clear most JDM headers when set on full stiff, and would most likely be the same on EP3. But to be assured of fitment though you'd need to run an Australian or US spec header, either OEM or aftermarket. Stuff like Skunk2, SSR, ASP will fit with the Australian DC5R front sway bar.
Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.
Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.
Subjective, but the time is usually the same for all cars...
It's also highly dependent on the person and type of driver/owner you are... If you're simply after the adrenalin of going fast and being pushed into the back of your seat in a straight line then you'll definitely get bored of any car quick.
Originally Posted by LD_Mart
Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.
IXA Battle Garage, they're in Thornleigh =)
Toda Racing AU | Shen * Speed Works | Jesse Streeter
It's a replica, fibreglass haha its from an eBay seller called Salla400, about 450 including shipping. Apparently their fitment is pretty good, and has sold a few . The people on other forums say its a decent fit.
vtak + jrsc = bwwaaaahinneeeee
IF GUNS don't kill people, peoplekill people does that mean that toasters don't toast toast, toast toast toast?
Anyone know any mechanics who are familiar with an EP3R to do the major 100k service around Hornsby? Otherwise ill be taking it out to hannys at Smithfield but it would be good to know good Honda mechanic in Hornsby area.
Major is all fluids and the timing chain tensioner -
Grab all the stuff and come to me at Giraween la cheap and sexy !
Hey guys just wondering if any of use have taken you EP3 down the 1/4 mile,what times are use running ? I took mine lastnight and lined my father up in his MPS 3 a few times but he couldnt launch it running low 14's lastnight but his best is a 13.7, my best time was my last run 14.093 is that any good ?? Mods :Gruppe M intake
Nitto Invo Tires 225/45R17 ran at 20PSI
Originally Posted by chargeR
Reply With Quote
Bookmarks