-
20-11-2011 08:33 PM
#11989
Kk the bolt must be narrower than the hole to accomplish this- GW
-
20-11-2011 10:11 PM
#11990
Originally Posted by itachi-kun
hey guys.. not an ep3 guy.. but a mate of mine needs your help ep3 gurus!
so he got ingalls camber bolts installed by jax, and they apparently couldnt get more than -0.1 degrees camber on the driver side, the passenger side managed-0.4 degrees.
this is the driver side bolt:
did they install it wrong? is the arrow on the bolt head supposed to point the same way as the washer tab to achieve maximum negative camber?
he is a bit hesistant to loosen the bolt and playing around with it as it will mess with the toe settings, wasting the alignment.
so can anyone confirm that the arrow on the bolt head is supposed to point the same way as the washer tab, before he tries to mess with it?
With my whiteline camber bolts, the washer tabs sit the same as the ones picture above, the tab faces inwards. From what I saw, when I installed them the washer can only sit at one position to the bolt i.e. the washer locks the bolt. When you spin it, it will spin the bolt/lobe as well.
My initial camber reading measured at -1.08 (camber tops were maxed out), I forgot to tell the guys at Jax I had the camber bolts. They did a second alignment and got -2.4 out of them.
-
21-11-2011 12:46 AM
#11991
Hey guys,
Recommend a good site for getting brand new original parts . .
I was looking but to some new tweeter covers and interior plastic covers, some rusty screws in engine bay came across this site . . They have everything and yes I mean EVERYTHING, lol . . Worth a look if you looking for genuine stuff
http://www.hondaoriginalparts.com/
Current: 2012 Alfa Romeo Giulietta QV , 2010 Mitsubishi Evolution X GSR
Previous: 2009 Mini Cooper S Chilli , 2004 Honda Civic Type R EP3 , 2003 Subaru Impreza WRX
-
21-11-2011 07:44 AM
#11992
Originally Posted by keepitlow
Hey guys,
Recommend a good site for getting brand new original parts . .
I was looking but to some new tweeter covers and interior plastic covers, some rusty screws in engine bay came across this site . . They have everything and yes I mean EVERYTHING, lol . . Worth a look if you looking for genuine stuff
http://www.hondaoriginalparts.com/
Yep. I have posted it here before.
Ordered a few things from them and they're pretty fast shipping.
Just be careful that some parts from UKDM and JDM can have different part numbers such as headlights,ecu, intake/exhaust manifolds.
-
21-11-2011 09:16 AM
#11993
Yahh Pete, staff there are great.. respond to your questions nice and fast..
I just order some bolts, tweeter cover, plastic covers.. nothing major~ : )
restoration on my interior!
Current: 2012 Alfa Romeo Giulietta QV , 2010 Mitsubishi Evolution X GSR
Previous: 2009 Mini Cooper S Chilli , 2004 Honda Civic Type R EP3 , 2003 Subaru Impreza WRX
-
21-11-2011 03:07 PM
#11994
Did they ask for you Vin number, when I asked about some parts they did?
-
21-11-2011 04:30 PM
#11995
Originally Posted by Perry
Did they ask for you Vin number, when I asked about some parts they did?
No they didn't ask for VIN. Just as long you have the part number.
The most accurate way to determine part number is through using HONDA EPC Japan. I've got a copy of it and it's all in Japanese. So it's takes a bit of guessing to navigate through the software. But I was able to manage to get the bits exclusive to our JDM model.
It basically has the same exploded view of the parts like as below:
-
21-11-2011 04:32 PM
#11996
Originally Posted by keepitlow
Hey guys,
Recommend a good site for getting brand new original parts . .
I was looking but to some new tweeter covers and interior plastic covers, some rusty screws in engine bay came across this site . . They have everything and yes I mean EVERYTHING, lol . . Worth a look if you looking for genuine stuff
http://www.hondaoriginalparts.com/
That link is awsome I've been trying to find a parts manual for ages, thats even better. Like a work shop manual and I can either order from there or take the part number into honda and get them to order it
-
21-11-2011 04:39 PM
#11997
Pete, do u need a Japanese windows to run that??
-
21-11-2011 05:41 PM
#11998
lol your inbox is full Perry~ :P
Current: 2012 Alfa Romeo Giulietta QV , 2010 Mitsubishi Evolution X GSR
Previous: 2009 Mini Cooper S Chilli , 2004 Honda Civic Type R EP3 , 2003 Subaru Impreza WRX
-
21-11-2011 05:46 PM
#11999
Here's the page for the parts, I'm quite certain its correct!
For Pre-facelift Model go here:
http://www.hondaoriginalparts.com/ho...hp?mod_01=9511
For Facelift Model go here:
http://www.hondaoriginalparts.com/ho...hp?mod_01=9725
Current: 2012 Alfa Romeo Giulietta QV , 2010 Mitsubishi Evolution X GSR
Previous: 2009 Mini Cooper S Chilli , 2004 Honda Civic Type R EP3 , 2003 Subaru Impreza WRX
-
21-11-2011 06:21 PM
#12000
Originally Posted by keepitlow
Awesome. Thanks Danny. I think I can finally get those fogs.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks