EP3 Type R

[Symphorced]

I have the Hardrace camber kit at the rear and one side maxed out at -2.1 degrees. :/

[[daan]]

yeh raise it up man see if it helps

[Twest]

I have the Hardrace camber kit at the rear and one side maxed out at -2.1 degrees. :/

...well this is awkward.

[Twest]

yeh raise it up man see if it helps

Yea I'll try that and see how I go...I can't find my damn cspanners.

[Twest]

I have a strong feeling the jax alignment machine was ****ed..Those numbers just don't sound right.

[Lukezen27]

I have a strong feeling the jax alignment machine was ****ed..Those numbers just don't sound right.

I'm with Twest

That seems backwards to me

[Twest]

I am running dc5 suspension however luke...Do you think that the dc5 coilovers have a different geometry?

[Twest]

Because according to the jax machine I am getting 2.3degs LH and 2.78degs RH camber...That definetely sounds off. OR...the coilovers somehow changed the geometry alot.

[Lukezen27]

So no one’s got any better instructions or diagrams on installed the air spoiler under the front bumper?

I am running dc5 suspension however luke...Do you think that the dc5 coilovers have a different geometry?

you might be on to something there Twest

dc5 coilovers or actual OEM dc5 suspensio?

Benny will know!

BENNNY do ya thing?

[Twest]

dc5 coilovers not oem, I have a strong feeling it is that. Put the car onto my mechanics wheel alignment gear and same results.

[keepitlow]

So no one’s got any better instructions or diagrams on installed the air spoiler under the front bumper

luke see if the below link can be of any help~

http://www.hondaoriginalparts.com/ho...&block_03=9511

[Symphorced]

So no one’s got any better instructions or diagrams on installed the air spoiler under the front bumper?

I just ordered a universal one. Probably going to just sikaflex it on somewhere down there. If not... RIVET GUN! Will let you know how it goes next week. How come you took your one off btw?