EP3 Type R

**doosra** · 26-12-2014 05:47 PM

Check Ryda or Soundmaster for prices or keep an eye out for when jbhifi do 30% off car audio. All you need is to get some speakers and run them off an amp and you'll get much improved sound. You could get some ok splits and rear speakers like alpine type s for about 200 and then spend another 100 on amp and then wiring kit which will be about 40 and you're done..

**typeRep3** · 26-12-2014 05:51 PM

Cheers for the suggestions guys, will most likely end up waiting for a sale

**latinstyle69** · 28-12-2014 04:59 PM

Originally Posted by Paletri

any idea where/how much to pick up a gruppe m intake?

Just over $800, I got it from this site wen it was $1k, had no issues
http://www.xposed.com.au/honda-civic-ep3-typer.html

**Mikeyy168** · 29-12-2014 12:06 AM

Originally Posted by latinstyle69

Just over $800, I got it from this site wen it was $1k, had no issues
http://www.xposed.com.au/honda-civic-ep3-typer.html

Got mine from this guy too, met him from ozhonda too.

**mryangtastic** · 31-12-2014 10:37 AM

For the members with Whiteline 24mm adjustable front sway bar, what headers are you using?

EDIT: I know that Whiteline 22mm on a DC5 clears all aftermarket headers. Just wandering if it's the same story with EP3.

**UNA91** · 03-01-2015 05:56 PM

Most DC5 headers will fit the EP3, my plm headers sit close to the swaybar when the car is jacked up. I also suggest you run stiffer motor mounts or atleast stiffer rear mount as i found mine knocking on the sway during more spirited drives.

**SHRUKA** · 05-01-2015 10:17 AM

Anyone know if I can get any kind of foglights to fit with the airwalker lip?

**DRMZON** · 05-01-2015 10:18 AM

Originally Posted by SHRUKA

Anyone know if I can get any kind of foglights to fit with the airwalker lip?

Pretty much have to custom fit them. Chris had some done them on his. Pretty sure only one with air walker lip with fog lights.

**mryangtastic** · 05-01-2015 01:41 PM

Do I buy both front and rear sway bars or just opt for the rear sway bar?

I want the car to handle as balanced as possible. Reduce understeer, reduce oversteer.
eBay seller couldn't provide the Whiteline parts in time, so I'll have to hunt elsewhere.
Meanwhile this gives me an opportunity to re-assess if I need the full set, front and rear.
Tempted to stay with the stock front sway bar to allow for PLM Headers.