What cams do i have?

[hitoriko]

Hi guys,

i've been searching around all different sites online trying to work out what camshafts i have

I have 2 pairs, one set that cam with my spare head (i was told by the seller they were standard b16a ones)

SET ONE:



The second pair i got them thrown in with a bunch of other parts i purchased, again i was told by this seller that they are type R

SET TWO:



can anyone identify these and set me straight.

Thanks

[na-118]

can't identify them,

but if you have :

get a pair of verniers, look in service manual or online,,

and measure the lobes ends and maybe there will be pics accompanying them

good luck

[mocchi]

use google mang. its goot. yeah byuddy.

http://www.ff-squad.com/tech/temp/VtecCams.htm

[hitoriko]

use google mang. its goot. yeah byuddy.

http://www.ff-squad.com/tech/temp/VtecCams.htm

As i said i looked and im still not sure unless i have itr and ctr cams

so you tell me

[mocchi]

how about start with taking a good, clear pictures.
then you read post #2, and #3 as base of your information.

[TODA AU]

Old dog says.... (at a guess)


Above is CTR/ITR exhaust cam


Above is CTR or 00 AUDM Intake cam


Above is 96Spec JDM ITR intake camshaft

But clearer photo's would be much better

[hitoriko]

Thanks TODA ill get some tonight i took those @ 10pm

[hitoriko]

Here are some HIGH RES Pics:

[dougie_504]

Fingers crosses for ctr cams bro. Much tougher

[rubixcube]

just out of curiosity, how does one identify camshafts by looking at the ends?

[GSi_PSi]

Fingers crosses for ctr cams bro. Much tougher

98+ audm/jdm ctr and itr are the same cams

[TODA AU]

hitoriko,

I'll answer your PM here as your inbox is full.

TODA B16A/B18C springs are not painted (at all)
The yellow painted springs are OEM ITR/CTR Intake springs / & the blue painted springs are OEM ITR/CTR exhaust springs.
These are fine to go with the CTR/ITR cams you have.
My guess is you have the leftovers from a B-Series cam swap, & the springs are in the Toda box.

Also, there is no such thing as a B-Series Toda Ti retainers,
This is a myth originating from less than well informed magazine journalists etc,

So use Supertech, Portflow or SK2

Cheers

Adrian