AP2 Tail Light Conversion

[-parkes-]

Pretty easy modification, took a few hours (you can tell from the shadow on my car lol) from my xmas arvo to complete.

But well worth it

Before



After



patiently waiting for more parts to come

[zerospel]

nice work! where did you get the lights from? any other additional parts required apart from the tail lights?

[ludecrs]

tail light gaskets.

[-parkes-]

I used gaskets, 2 blubs and ap2 tail light wiring loom plugs. I re-did the plugs instead of sanding / modifying the ap1 to make them fit.

[zerospel]

excuse my ignorance but when you "re-did the plugs" do you mean you just cut the wire to get the original plugs off and put ap2 ones on the same wire ?

[ROLLED]

??? HE just said what he did in the post about yours...

"I re-did the plugs instead of sanding / modifying the ap1 to make them fit."

Maybe don't post on ozhonda when your high mate?

[-parkes-]

excuse my ignorance but when you "re-did the plugs" do you mean you just cut the wire to get the original plugs off and put ap2 ones on the same wire ?

Didn't need to cut the wires, just pulled the wires out making sure not to damage the metal soldered bit and inserted the metal part into the new AP2 plug. No cutting or soldering required.

[zerospel]

cool thanks mate, just considering to do the ap2 tail lights as well, looks very nice!
whats going on it next?

[-parkes-]

A bunch of carbon fiber Chargespeed bits, wheels, exhaust and stereo. Should be good when it's finished.

[twofake]

Hi Parkes,
can you post a link where you get the AP2 tail lights and gaskets please? Was it much for postage as well?
Looks really great.

[-parkes-]

Hey mate,

I can't really remember how much the tail lights were. For some reason I keep thinking $550 from the US delivered with all gaskets and brackets.

[ludecrs]

sounds about right.