-
yo yo john.. reckon u can sorce me somehting. so i can make my car tunable??
P30 u think?? hook a brother up..
when i get something new.. i send down the spoon chip..
-
does this mean that the exhaust o2sensor has to be replaced?
-
Originally Posted by Spoon-Accord
yo yo john.. reckon u can sorce me somehting. so i can make my car tunable??
P30 u think?? hook a brother up..
when i get something new.. i send down the spoon chip..
Ain't P30 used for b16a ?
That's what my ECU is I think...
Originally Posted by ChargeR
Ozhonda mods don't sleep, they wait.
-
yeh.. i can't make the P13 tunable..
so they used a P30 from ur car or engine..
and make it tunable! :P
Kenny
-
I did this paperclip trick, and I got no flashes, which I figured was a good thing. I then unplugged my O2 sensor to make sure I was doing it right.
With the O2 sensor unpluggedm I still didn't get it to throw any error codes??? Shouldn't it throw an error code?
Last edited by tegboy; 11-04-2005 at 05:44 PM.
-
Green block gangster
Array
depends, if your got a one wire O2 sensor you will need to drive your car for a while for it to come on, if you have a 4 wire o2 sensor you should get a code straight away, code 41, o2 heater.
if you had no codes, its alll good, as long as the light stayed on.
-
Originally Posted by ECU-MAN
depends, if your got a one wire O2 sensor you will need to drive your car for a while for it to come on, if you have a 4 wire o2 sensor you should get a code straight away, code 41, o2 heater.
if you had no codes, its alll good, as long as the light stayed on.
Its a single wire O2 sensor. Nah the light didn't even come on. It comes on when I start the car, but that's it! Hmmmmm, is my car working as it should be.
-
Originally Posted by tegboy
Its a single wire O2 sensor. Nah the light didn't even come on. It comes on when I start the car, but that's it! Hmmmmm, is my car working as it should be.
Originally Posted by ECU-MAN
depends, if your got a one wire O2 sensor you will need to drive your car for a while for it to come on, if you have a 4 wire o2 sensor you should get a code straight away, code 41, o2 heater.
if you had no codes, its alll good, as long as the light stayed on.
-
Did the test this morning. Got warning code 15 - "Ignition output signal".
Not sure what this means and whether or not it's something I should be worried about.
I've found the troubleshooting procedure in the workshop manual, but it doesn't really explain what the error reported means.
EDIT: Well, I reset the ECU and it seems to have disappeared. So that's good.... I think.
Last edited by Vivski; 29-04-2005 at 11:30 PM.
-
Out of sight out of mind, eh?
-
where did u get the ecu codes from?? what would the codes be for a jazz?
-
Originally Posted by bigteethygrin
if your warning lights havent come on and ya cars still running crap then the ecu wont have any errors logged and so I think would likely show you nothing.
is this true?.. my engine light has been coming on at random times
when i turn car off the light just goes away
do i need to wait for the light to come on? or turn the car off and test the paper clip?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks