DIY : CHECK ECU for j00 !

[Dxs]

i have a EF8 b16a1..

error 22 ..
is this also vtec pressue switch or valve?

this would stop vtec kicking in too?

[destrukshn]

can you do this test on a s2k?
if so, how?

[ECU-MAN]

same

just jumper the blue 2 pin femail connector

read the flashes on the dash

[destrukshn]

so take off the left hand side kick panel and it should be threre somewhere?
same colour wires?

[ECU-MAN]

its actually in the drivers side, under the dash inline with the clutch pedal

the connector sits in the green holder that holds the 2 pin SCS connector and the 3 pin DLC connector

you want the 2 pin female connector with brown wires

[destrukshn]

thank you very much again, mr. you are the shiznit
lol.

[BoneZ]

hey ecu-man.i have a 94 integra vti-r.i wanted 2 ask.where would my blue 2 pin femail connector be in my car and w0ould the codes uve posed apply 2 my integra??

[CRXer]

hey ecu-man.i have a 94 integra vti-r.i wanted 2 ask.where would my blue 2 pin femail connector be in my car and w0ould the codes uve posed apply 2 my integra??

Looks exactly same as ben shows in 1st post(green holder with 2 blue plugs),but i think its located more towards firewall above passenger foot well.

Edit:codes already posted by ben,yes they r the same

[BoneZ]

hey fanks 4 all dah help CRXer...appreciate it...

[ECU-MAN]

yeah Bonez what CRXer said.

Pasangers kick Pannel in foot well

[dynosaur]

Excuse me everybody .......

Does it works for JDM DC2 96 Spec ? and how do we define the code from the blips ?

[ECU-MAN]

yes its the same

long flashes indicate tens
short flashes indicate units

so for eg

two long and 3 short together is code 23

two long on there own is code 20

two short on there own is code 2


there is a pause between codes