Results 1 to 3 of 3
  1. #1

    OBD or OBDII on 95 honda accord?

    Hi could anyone please tell me if my 95 honda accord has OBD or OBDII on it or if they know where the port is? Is it possible to get after market OBDII installed or anything??

    Thanks

  2. #2
    Member Array
    Join Date
    Dec 2005
    Location
    CL9 Euro 6MT
    Car:
    Sydney
    ODB2 was released in cars around 1996 so your 1995 model may just have ODB1, especially if your chassis was release earlier than 1995.

    The way to check is to have a look at the connector under the dash on the passenger side near the door (under the glovebox).

    If you find this connector, its ODB2


    Otherwise if you find a simple 2pin connector (should be green or brown if I recall correctly), then its ODB1.

    You can buy OBD2 readers from eBay for about $30+

    Not sure if you can upgrade from ODB1 to ODB2. I assume you would need to install a later ECU, change some harnesses, etc..
    .© ♪

  3. #3
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    95 will be OBDI,

    AUDM do not have the OBDII connector

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.