Page 1 of 2 12 LastLast
Results 1 to 12 of 23
  1. #1

    What oil to use to stop gear crunching?

    On my run around (1990 2.0L Camry)
    3rd gear crunches a lot, to the extent I have to double clutch to downshift and go into 3rd slowly
    Now, I realise that it'll never go away, but is there any oil to at least make it a bit better?
    I have ATF Dextron III in it now which is recommended for that car
    It crunches less when it's cold/more when hot
    So, should I get thicker oil? Or just leave what's in it and deal with it?

  2. #2
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    pardon?
    your using atf dexron 3?
    that's for autos? who recommended that?

  3. #3
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    dexron 3 is Auto box oil.
    Most manuals use a thicker oil like 75-85.
    Evo IX - THE FINAL EVOLUTION

  4. #4
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    Quote Originally Posted by destrukshn View Post
    pardon?
    your using atf dexron 3?
    that's for autos? who recommended that?
    lol imagined you saying that with an english accent, some some specs, a tux and the monopolu guy hat... prey much like the monopoly guy hahaha
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  5. #5
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    Quote Originally Posted by dsp26 View Post
    lol imagined you saying that with an english accent, some some specs, a tux and the monopolu guy hat... prey much like the monopoly guy hahaha
    lol
    lol
    you couldn't imagine that
    though i do know of 1 asain guy, who has a scottish accent, and his chinese.

  6. #6
    Member Array
    Join Date
    Dec 2005
    Location
    CL9 Euro 6MT
    Car:
    Sydney
    Drain that fluid and put Toyota MTF in there (buy it from a toyota dealer), and if it still crunches then its likely the Synchros are gone and need replacing.
    .© ♪

  7. #7
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    flush it out twice though.

  8. #8
    The factory recommended 'oil' for at least some manual boxes is ATF.

  9. #9
    i heard putting engine oil is good.
    my mate put mobil1 10w-30 in his b16a civic GB and it shifts like a dream

  10. #10
    how many k's on the current clutch ?

  11. #11
    Check ur synchros. Mine are gone and crunch like ****. It's fun.
    The CSS Gallery List - Website Submission Made Easier

  12. #12
    Member Array
    Join Date
    Jun 2006
    Location
    Antarctica
    Car:
    A few...
    +1 to some manual boxes needing ATF.

    If it crunches worse when hot i would be putting all my money on your synchros being shagged and changing the oil wont do diddly-squat.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.