clutch

**DNTBLO_S2k** · 17-01-2008 12:27 PM

hey guys in need of a clutch soon and was just wondering if yous would recomend a pbr clutch? also got quoted on a standard oem exceddy clutch and they machine my flywheel, what yous think or recomend.

i know there heaps of clutch thread but just wanted to ask that question.

**.::F[L]Y::.** · 17-01-2008 10:01 PM

i need a new clutch as well lol

what prices have you been quoted?

**DNTBLO_S2k** · 18-01-2008 07:21 AM

1800 fitted from hannys with a new flywheel but thats all the standard clutch i think. 1400 fitted from toda just clutch kit and 1200 from western clutch fitted. these wre all the oem exceedy clutches.
was told to go exceedy hyper clutch kit? mate works at repco so can get it bit cheaper.
should i get a ligthended fly wheel? if so wich one?

**.::F[L]Y::.** · 18-01-2008 09:11 AM

you know the exedy oem replacement clutch kit can be purchased for about 305usd? im thinking of just buying the clutch and bringing it there for install.

In terms of the flywheel, for a mod thats about 700 extra (toda flywheel) im not sure if its worthwhile. some will say it is. personally i think that money could be better spent towards a cat back exhaust system. but then again i guess since ur doing a clutch change might as well get it all done in one hit.

**DNTBLO_S2k** · 18-01-2008 10:04 AM

what about just another stock flywheels or machining the stock one? worth it? how long will it take to get shipped? if you do so let me knowi will place a order with you.

**Malenic1981** · 18-01-2008 05:33 PM

$2500 for TODA high power kit, (toda lighten flywheel included), that's fitted

**NVD52K** · 19-01-2008 09:57 AM

i just bought the toda high power kit at toda australia in wetherill park for 1500 it goes pretty good bit more heavier on the foot and the clutch buzz is abit louder aswell btu sounds meaner and the lightened fly wheel works good man

**destrukshn** · 19-01-2008 10:04 AM

it is recommended by honda to replace your flywheel as well.
well the OEM one, when you change your clutch.

**blk_shadow** · 19-01-2008 10:06 AM

Originally Posted by destrukshn

it is recommended by honda to replace your flywheel as well.
well the OEM one, when you change your clutch.

HOW MUCH IS FLYWHEEL AND CLUTCH FROM HONDA APPROX. COST?

**AusS2000** · 19-01-2008 02:25 PM

I'd only replace the flywheel if it needs resurfacing. If the face has no heat cracks just clean it up. I used a mouse sander on mine.

The OEM is a very good clutch and at $305 is a bargain.

THe Exedy Hyper Single is a huge investment and not a particularly streetable clutch. I have one and it's hard work. I still stall a lot.

**Malenic1981** · 21-01-2008 01:13 AM

i just bought the toda high power kit at toda australia in wetherill park for 1500 it goes pretty good bit more heavier on the foot and the clutch buzz is abit louder aswell btu sounds meaner and the lightened fly wheel works good man

So you still have buzz???

**DNTBLO_S2k** · 21-01-2008 07:21 AM

Originally Posted by AusS2000

I'd only replace the flywheel if it needs resurfacing. If the face has no heat cracks just clean it up. I used a mouse sander on mine.

The OEM is a very good clutch and at $305 is a bargain.

THe Exedy Hyper Single is a huge investment and not a particularly streetable clutch. I have one and it's hard work. I still stall a lot.

$305? where did you get that price from? wouldnt mind checking that out, do u still get clutch buzz with the hyper one? thanks