clutch

[jko2]

I've got an exedy hyper single clutch kit in my garage if anyone is interested just pm me.
4.8kg flywheel, 6puck ceramic, 1tonne pressure plate.
Not for the inexperienced driver.

[NVD52K]

apparently all aftermarket clutches give a loud buzz although if you put the stock oem cover back onto the pressure plate it isnt as bad

[DNTBLO_S2k]

anyone recomend pbr or daiken?
hey jko2 pm sent mate

[ludecrs]

I can get PBR at 25% off RRP
and I did up a quote for Jon the other day, its $665 for a new Exedy clutch replacement.

[ILUS1V]

I can get PBR at 25% off RRP
and I did up a quote for Jon the other day, its $665 for a new Exedy clutch replacement.

could you do this again for me 2 ?
in 2 days mines gone from not to bad to NAFFED........ and i dont exactly ride the thing.
would need to be done by the end of this week, were heading to Phillip Isle

[martin]

so whats a good clutch kit for a everday stock s2000? im getting my motor pulled out in a weeks time to get full respray and the guy whos doing it goes he can check the clutch and see if its still good or not and if its goneskiees then he'll be able to replace it at no extra cost. i just gota supply clutch kit. so just wanted to know which kit would be good bang for your buck.

[aznsiko]

i did my clutch a few months back now.. got the sports tuff exedy clutch and just machined the flywheel.. seems to be all good and fine.. lol.. the standard clutch from what ive been told slips at top end.. my friend bought his s2k brand new.. and straight ut of the show room it slipped...

[ILUS1V]

i did my clutch a few months back now.. got the sports tuff exedy clutch and just machined the flywheel.. seems to be all good and fine.. lol.. the standard clutch from what ive been told slips at top end.. my friend bought his s2k brand new.. and straight ut of the show room it slipped...

what you pay for yours n where from, im chassing a clutch NOW !!! ill be lucky if the car still goes by the end of the week i rekon

[.::F[L]Y::.]

got my clutch from ebay for about 500 landed. DIY swap at home. definately not for the faint hearted....

so good so far.

[ludecrs]

Couldn't get the PBR, only the Exedy - $665.

[DNTBLO_S2k]

hey ludecrs im gonna get the heavy duty one of you, in 2weeks time goin over seas on 2morow so when i get back ill pm you.

my clutch is that bad now that when i put my foot down in any gear while cruising it just revs.

[datzlr]

so heavy duty is ok ?